Troubleshooting
Problem | Possible Cause | Possible Solution |
The indicator is not lighting.
The Evaporative Cooler is not connected to a power outlet or the power outlet is not switched on.
Insert the plug into a power outlet and make sure the outlet is switched on.
| The circuit board is damaged. | Do not attempt to fix the circuit board. |
|
| Send it to a qualified repair centre for |
|
| servicing. |
|
|
|
The Evaporative Cooler | The motor has | Allow the Evaporative Cooler time to |
is not operating. |
| cool before turning it on. |
|
|
|
The louvre won't oscillate. | The direction key has not been | Press the direction key once. Press it |
| touched. | again to turn the oscillating feature off. |
| The louvre motor is damaged. | Do not attempt to fix the louvre motor. |
|
| Send it to a qualified repair centre for |
|
| servicing. |
|
|
|
The temperature of air being | The pump needs to be cleaned. | Follow the directions under Care and |
expelled from the Evaporative |
| Cleaning to clean the pump. |
Cooler is not cold enough. |
|
|
| The pump is damaged. | Do not attempt to fix the pump. Send it |
|
| to a qualified repair centre for servicing. |
|
| The timer is not operating. |
| The | Follow the directions under Care and |
|
| Cleaning to clean the |
|
|
|
The fan type can't be operated. | The evaporated net is blocked. | Follow the directions under Care and |
|
| Cleaning to clean the evaporated net. |
|
|
|
The speed can't be operated. | The circuit board is damaged. | Do not attempt to fix the circuit board. |
|
| Send it to a qualified repair centre for |
|
| servicing. |
|
|
|
7
