Mistral MEC1R manual Getting to know your Evaporative Cooler, Operation of your Evaporative Cooler

Getting to know your Evaporative Cooler

Congratulations on the purchase of your new Evaporative Cooler by Mistral.

Before first using your new Evaporative Cooler, it is most important that you read and follow the instructions in this use and care booklet, even if you feel you are familiar with this type of appliance.

Your attention is drawn particularly to the section dealing with IMPORTANT SAFEGUARDS. Find a safe and convenient place to keep this booklet handy for future reference.

This appliance has been designed to operate from a standard domestic power outlet. It is not intended for industrial or commercial use.

Your Evaporative Cooler uses energy efficient technology to bring fresh air into your home or office. The air-cooling efficiency value is greater than that of traditional air conditioners. It also has zero impact on the ozone layer, helping to reduce the greenhouse effect.

In addition to the fan and timing operations, your Evaporative Cooler has natural air fan and sleep functions.

Operation of your

Evaporative Cooler

Before first use, remove all packaging material and ensure your Evaporative Cooler is in good condition.

Add cold or iced water by opening the water box cover and filling it to the highest level indicated.

Control Panel (on unit)

			nature
0.5 1	2	4 normal	sleep	lo med hi
				ON/OFF
Flow				Cool
Timer			Type	Speed

Remote Control

SPEED ON/OFF

TYPE

FLOW

COOL

TIMER

Note: The functions on the control panel are the same as those on the remote control

On/Off

Pressing the on/off switch will turn the Evaporative Cooler on at medium speed. After 3 seconds, it will revert back to low speed or to the pre-programmed memory settings. When the Evaporative Cooler is in operation, pressing this switch will turn it off. The memory function will remember the settings in use when the Evaporative Cooler is turned off and re-use the same settings when it is switched on again.

Speed

Press this key to choose between low, medium and high fan speeds.

Fan Type

Use the fan types key to choose between normal, nature and sleep fan types.

Normal: Normal settings are high, medium or low depending on speed selected.

4