Netlink e340 Users Guide
For Users on Resilient 3300 ICP Systems
If during a call, you hear two beeps repeated every 20 seconds it means that your phone is switching to a secondary 3300 ICP system. The call continues but the keys and features on your phone stop working. The keys and most features begin working again after you go
Feature Keys
To activate or deactivate a feature:
1.Press FCN. The screen lists the first four fixed features (Trans/Conf, Cancel, Message, Redial).
2.Press FCN repeatedly to step through the displays of programmed features.
3.To activate or deactivate a feature, press the shortcut key of the desired feature. When a feature is activated, a plus sign (+) appears in the display after the shortcut.
Note: You can also use the Up, Select, and Down buttons located on the left side of the handset to scroll through the displays and activate the features on the list.
4.Press 
to exit the list of line appearances.
Note: Line appearances must be programmed by your system administrator.
To access a line appearance
1.Press 
to go
2.While
There are nine possible line appearances which correspond to the nine line indicators across the top of the handset display. When a line is in use, the indicator changes to the line number and a plus sign (+) appears after the shortcut key on the list (emulating a lit LED).
3.Press the LINE key again to display the second screen of the list if more than four line appearances have been assigned to the handset.
4.To select a line, press the corresponding shortcut key.
You can also use the Up, Select, and Down buttons located on the left side of the handset to scroll through the displays and activate the line appearances on the list.
5. Press 
to exit the list of line appearances.
6
