Mitel KU990 manual Pairing with another Bluetooth device

To receive a file:

1To receive fi les your Bluetooth must be both On and Visible. See change your Bluetooth settings below for more information.

2A message will prompt you to accept the

file from the sender. Touch Yes to receive the fi le.

3You will see where the fi le has been saved and you can choose to View the fi le or Use as wallpaper. Files will usually be saved to the relevant folder in My Files.

Changing your bluebooth settings:

1Touch and choose Settings.

2 Choose Bluetooth then Settings. Make your changes to:

My device visibility - Choose to be Visible or Hidden.

My device name - Enter a name for your KU990.

Supported services - Choose how to use Bluetooth in association with different services. See Using your phone as

a modem on page 90 or Using

a Bluetooth headset on page 96. My device address - Change your Bluetooth address.

Pairing with another Bluetooth device

By pairing your KU990 and another device,	01
you can set up a passcode protected	02
connection. This means your pairing is
more secure.	03

1Check your Bluetooth is On and Visible.

	You can change your visibility in the	04
	Settings menu.	05
2	Touch Paired Devices then New.
3	Your KU990 will search for devices.	06
	When the search is completed Refresh	07
	and Add will appear on screen.
4	Choose the device you want to pair with	08
	and enter the passcode then touch OK.

5Your phone will then connect to the other device, on which you should enter the same passcode.

6You passcode protected Bluetooth connection is now ready.

Settings

95