Connecting Wires to Terminals
To Kenwood disc changer/ External optional accessory
⁄To connect these leads, refer to the relevant instruction manuals.
Fuse (10A)
Front right output (Red)
FRONT | Front left output (White) |
|
Rear left output / Sub Woofer left output (White) Rear right output / Sub Woofer right output (Red)
FM/AM antenna input
If no connections are made, do not let the wire come out from the tab.
Wiring harness (Accessory1)
When using the optional power amplifier, connect to its power control terminal.
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the
Connect to the terminal that is grounded when either the telephone rings or during conversation.
Power control wire (Blue/White)
P.CONT
Motor antenna control wire (Blue)
ANT.
CONT
TEL mute wire (Brown)
MUTE
⁄To connect the Kenwood navigation system,
consult your navigation manual. | White/Black |
| |
To front left speaker | White |
| Gray/Black |
To front right speaker | Gray |
| Green/Black |
To rear left speaker | Green |
| |
| Purple/Black |
To rear right speaker | Purple |
Ignition key switch | Car fuse box |
|
| ACC | Ignition wire (Red) |
Car fuse box |
| Battery wire (Yellow) |
|
| |
(Main fuse) |
|
|
Battery +
22 English
Ground wire (Black) - (To car chassis)
–