Troubleshooting Guide
The messages shown below display your systems condition.
EJECT: | • No disc magazine has been loaded in |
| the changer. The disc magazine is not |
| completely loaded. |
| • No CD in the unit. |
NO DISC: | No disc has been loaded in the disc |
| magazine. |
TOC ERR: | • No disc has been loaded in the disc |
| magazine. |
| • The CD is quite dirty. The CD is upside- |
| down. The CD is scratched a lot. |
The disc is unreadable. | |
BLANK: | Nothing has been recorded on the MD. |
NO TRACK: | No tracks are recorded on the MD, although it |
| has a title. |
Media was played that doesn’t have data | |
| recorded that the unit can play. |
NO PANEL: | The faceplate of the slave unit being |
| connected to this unit has been removed. |
The unit is malfunctioning for some reason. | |
| ➪ Press the reset button on the unit. If the |
| |
| your nearest service center. |
Something is wrong with the disc magazine. | |
| Or the unit is malfunctioning for some reason. |
| ➪ Check the disc magazine. And then press |
| the reset button on the unit. If the |
| code does not disappear, consult your |
| nearest service center. |
LOAD: | Discs are being exchanged in the Disc |
| changer. |
READING: | The unit is reading the data on the disc. |
IN (Blink): | The CD player section is not operating |
| properly. |
| ➪ Reinsert the CD. If the CD cannot be |
| ejected or the display continues to flash |
| even when the CD has been properly |
| reinserted, please switch off the power |
| and consult your nearest service center. |
PROTECT: | The speaker wire has a |
| touches the chassis of the vehicle, and then |
| the protection function is activated. |
| ➪ Wire or insulate the speaker cable |
| properly and press the reset button. If |
| the "PROTECT" code does not disappear, |
| consult your nearest service center. |
NA FILE: | An Audio file is played with a format that this |
| unit can’t support. |
| ➪ |
COPY PRO: | A |
| ➪ |
26 English