Installation
non-Japanese cars
Metal mounting strap (commercially available)
Firewall or metal support
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Screw (M4X8) (commercially available)
⁄
•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Japanese cars
1Refer to the section <Removing the hard rubber frame> and then remove the hard rubber frame.
2Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws.
TN
N | T | T/N |
|
T: Toyota cars
N: Nissan cars
|
| 8 mm | 8mm |
|
| MAX. | |
|
| MAX. | |
| 3 |
| |
|
| 4 | |
|
|
| |
ø5mm |
|
| ø5mm |
Accessory3...for Nissan car
Accessory4...for Toyota car
¤
•During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit.
•Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.
English 23