Mitsubishi XD530E Function of the wireless icon, If IP of your computer is obtained automatically

XD530U_ENG_Wireless_QS.fm Page 2 Friday, May 16, 2008 5:29 PM

2)Enter the login code indicated in red in the center of the screen projected by the projector, and then click the [OK] button.

Projected screen Enter the same LOGIN CODE.

5. Function of the wireless icon

Login code	Detailed settings
	Icon minimization
	Close

Refresh during a pause

Stop

Pause/Restart

Troubleshooting: The projector cannot be connected wirelessly.

Problem		Solution
• The wireless function of your computer is not available.	• Some computers are equipped with a wireless power switch. Turn the switch ON.
	• Select and right-click the "Wireless Network Connection" icon. If the properties are disabled,
• The wireless connection icon of your computer is not
		select "Enable".
displayed.
	• Some computers allow you to select Disable/Enable for the wireless function using BIOS. For
• "Wireless Projector" is not displayed in "View Available
		more details, see the manual of your computer.
Wireless Networks".
	• Perform NETWORK RESET in the WIRELESS menu of the projector.
• The message "No any wireless card can be used"
	• Set POWER MODE of the projector to ON.
appears.
	•	Mount the antenna.
The message "Due to your network or firewall setting,
the client application cannot connect to the projection	•	Open the "Windows Firewall" dialog box from "Control Panel" of your computer, and then check
server. Please check related settings to allow this appli-		that the "Wireless Projector" check box is selected in the "Programs and Services" list in the
cation to be able to communicate with the server!"		[Exceptions] tab.
appears.
	• Switch the input source of the projector to "WIRELESS".
The SSID name of this projector is not displayed for the	• Set POWER MODE to ON or AUTO in the menu for the wireless function of the projector.
	• If the reception status is poor, move the projector closer to the computer, or make sure that no
available access point.
		obstacle exists between the projector and the computer.
	• Enable the SSID broadcast in the network setup.
	• Depending on the security software, a function to prevent access to Phishing sites is provided.
		Disable the function while using the projector.
	<If IP of your computer is obtained automatically>
		• Display the "Wireless Network Connection" properties of your computer, and then check that
		"Obtain an IP address automatically" and "Obtain DNS server address automatically" are
		selected in the "Internet Protocol (TCP/IP)" properties.
		• If you changed the network setup settings in the system administrator screen for the Web,
		change the properties of "Wireless Network Connection" in your computer according to the
• You cannot log on the screen.		changed settings.
		• Perform NETWORK RESET in the WIRELESS menu of the projector.
• The Web screen "Wireless Projector" is not displayed.
		• Set POWER MODE of the projector to ON.
• The IP of the wireless projector is displayed as 0.0.0.0
	<If your computer is set to a static IP>
in the login screen.
		• Confirm that the Server IP of the projector is different from the IP address of your computer.
• The message "No Projector Found" or "Network is not
		• Make sure that the first three digits of the Server IP of the projector are the same as those of
available" appears.
		the IP address of your computer.
		(Example: the Server IP of the projector: 192.168.100.10; the IP address of your computer:
		192.168.100.15)
	• Make sure that the correct Web address is entered.
		(Make sure that "www" is not included in the address.)
	• Perform NETWORK RESET in the WIRELESS menu of the projector.
	• Set POWER MODE of the projector to ON.
	• Disable or cut other local area connections. Especially, you cannot connect your computer to the
		projector while your computer is being connected to the Internet.
	• If your computer is set to a static IP or is used in a DHCP environment, enter the Server IP dis-
The Web page "Wireless Projector" is not displayed		played in the default screen of the wireless connection.
even if you run the Web browser.	•	Select the [Tools] menu → [Internet Options] → [Security] → [Custom Level] to set [Allow META
		REFRESH] to [Enable].
You cannot install the connection software.	•	Log on as a user with administrator rights.
The projector cannot be connected wirelessly.	•	Check if any network bridge is used.

-2-