Mitsubishi Electronics 2060U manual Self Diagno

PROBLEM

Black vertical lines are visible on the screen.

Abnormal Picture

Two fine horizontal lines are visible on the screen.

A buzzing sound when power on.

	This monitor has
FUNCTION	"SELF DIAGNO-
	If the signal cable
	SIS" to check the
	operating condi-
	tions of the moni-
	tor.
DIAGNOSISSELF	is disconnected or
	abnormal signal is
	received, the fol-
	lowing message
	will appear.

ITEMS TO CHECK LOCATION

Thin vertical black lines on one or both sides of the screen. This minor condition is caused by grille element overlap which can occur during shipping.

Position an open white window over the affected area of the screen and maximize the brightness and contrast controls. This will cause localized heating of the overlap which will clear in a few minutes. Be sure to readjust the brightness and contrast controls back to the normal viewing levels after this procedure.

•The 2 very faint thin lines across the screen are normal. They are caused by the aperture grille stabilization filaments(Damper Wires) which are required for all aperture grille CRTs’.

Aperture Grille
	Shadow of
Electron Gun	Damper Wires
Damper Wires

Aperture Grille Type

Shadow of Damper Wires

•A brief vibration or hum sound that is heard just after power up is normal. This is caused by the automatic degaussing function. This sound will be heard each time the monitor is powered up from a cold start and each time the manual degauss button is used.

•Check the color bar. (e.g RED, GREEN, BLUE)

•CHECK the H, V signal input.

•Push the button, the picture size is expanded to a large size.

•Check power-on indicator on the bezel.

If this indicator is blinking (Orange--> Black--> Orange), there is a possibility of failer.

Please call your Authorized Product Support.

ENGLISH

- 1-13 -