Mitsubishi Electronics 4XIXIXIXIXI Mitsubishi Installation, Configuration and Connections, Page

Mitsubishi Installation Configuration and Connections

6.Plug the 15-pin HD connector of the Projector Communications Extension cable (shown as CC 50') into the PJ Comm port on the System 4xi. The other end plugs into the other 9-pin male D connector on the Comm Adapter (mentioned in Step 5).

______ Secure all of the connector screws.

7.Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV cable onto the System 4xi output and those on the other end onto the matching BNCs on the Mitsubishi VS projector connector panel. See connection diagram below.

System 4xi Series – Mitsubishi VS Projector Connections

Use the illustration below as a guide when connecting the System 4xi to a Mitsubishi VS projector. Refer to Mitsubishi VS documentation to continue the installation.

____________ In a rack mount, do NOT allow the weight of the cables to be supported by the

System 4xi. See page 2-5 for cabling guidelines.

"E" 26-473-01 "E"

__________ System 4xi channel numbers correspond to the projector’s “Group” numbers.

Extron • System 4xi Switcher Series • User’s Manual • P/N 68-401-02 Rev. C Page 5