Mitsubishi Electronics 4XIXIXIXIXI Mitsubishi Installation, Configuration and Connections, Page

Mitsubishi Installation Configuration and Connections

6.Plug the 15-pin HD connector of the Projector Communications Extension cable into the PJ Comm port on the System 4xi.

______ Secure all of the connector screws.

7.Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV cable onto the System 4xi output. Connect the 15-pin connector on the other end of the RGBS/HV cable to the PC-1 Input connector on the Mitsubishi LVP-X100 connector panel.

System 4xi Series – Mitsubishi LVP-X100 Projector Connections

Use the illustration below as a guide when connecting the System 4xi to a Mitsubishi LVP-X100 Projector. Refer to Mitsubishi LVP-X100 documentation to continue the installation.

15-Pin Male

ComAdapter

G

26-475-01 "G" SY-VGA 26-173-01

9-Pin Female

RGBHV 5 BNC

15-Pin Male

INPUT 1

INPUT 2

INPUT 3

INPUT 4

OUTPUT

H/HV

V

AUDIO

H/HV

V

AUDIO

H/HV

V

AUDIO

H/HV

V

PJ COMM

H/HV

AUDIO

V

AUDIO

R/C G/Y B R/C G/Y B R/C G/Y B R/C G/Y B RS 232 R/C G/Y B

____________ In a rack mount, do NOT allow the weight of the cables to be supported by the

System 4xi. See page 2-5 for cabling guidelines.

Extron • System 4xi Switcher Series • User’s Manual • P/N 68-401-02 Rev. C Page 3