Disclaimer
Mitsubishi Electric Australia Pty. Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, Mitsubishi Electric Australia reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.
Diamond Digital is a registered trademark of Mitsubishi Electric Australia Pty. Ltd.Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks remain the property of their respective owners.
Reference Information
For future reference, write the following information about your monitor in the space below. The serial number is found on the back of the product.
Monitor Information
Product Name: | Diamond Digital DV300/DV301B |
Serial Number:
Date of Purchase:
Dealer Information
Dealer:
Telephone Number:
Address:
3
DV300/DV301B 30" Multimedia Information Display
1. Safety and Installation
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your monitor:
•Unplug the monitor if you are not going to use it for an extensive period of time.
•Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or
•Consult a service technician if the monitor does not operate normally when you have followed the instructions in this manual.
•Only qualified service personnel should open the casing cover.
•Keep the monitor out of direct sunlight and away from stoves or any other heat source.
•Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.
•Do not block the ventilation holes on the cabinet.
•Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.
•If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds before re- attaching the power cable or DC power cord for normal operation.
•To avoid the risk of shock or permanent damage to the monitor do not expose the monitor to rain or excessive moisture.
•When positioning the monitor, make sure the power plug and outlet are easily accessible.
•IMPORTANT: Always have a screen saver program installed on your computer. If a still image in high contrast remains on the screen for an extended period of time, it may leave an
Consult a service technician if the monitor does not operate normally when the operating instructions given in this manual have been followed.
Installation Locations
•Avoid exposure to heat and extreme cold
•Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold.
•Avoid moving the product between locations with large temperature differences. Choose a site that falls within the following temperature and humidity ranges.
•Temperature:
•Humidity:
•Do not subject the product to severe vibration or high impact conditions. Do not place the product inside a car boot.
•Take care not to mishandle this product by either knocking or dropping during operation or transportation.
•Do not store or use the product in locations where there is a high level of humidity or in dusty environments. Do not allow water or other liquids to spill on or into the product.
4
