Mitsubishi Electronics EW270U user manual EN-3

Note: This symbol mark is for EU	Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality
countries only.	materials and components which can be recycled and/or reused.
		ENGLISH
This symbol mark is according to	This symbol means that electrical and electronic equipment, batteries and accumula-
the directive 2002/96/EC Article 10	tors, at their end-of-life, should be disposed of separately from your household waste.
Information for users and Annex	If a chemical symbol is printed beneath the symbol shown above, this chemical sym-
IV, and/or to the directive 2006/66/	bol means that the battery or accumulator contains a heavy metal at a certain concen-
EC Article 20 Information for end-	tration. This will be indicated as follows:
users and Annex II.	Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
	In the European Union there are separate collection systems for used electrical and
	electronic products, batteries and accumulators.
	Please, dispose of this equipment, batteries and accumulators correctly at your local
	community waste collection/recycling centre.
	Please, help us to conserve the environment we live in!

WARNING

•The lens cap is for protecting the lens. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up. Remove the lens cap when you turn on the projector.

•One of power cords for the U.S., Europe, U.K./Singapore, Australia, Korea and China is provided appropriately.

•This projector uses the power plug of three-pin grounding type. Do not remove the grounding pin from the power plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall out- let.

•In case that the power cord for the U.S. is provided with this projec- tor, never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you want to use a power sup- ply using other voltage than rated, prepare an appropriate power cord separately.

•Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

•Do not place any objects on the power cord or do not place the pro- jector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replace- ment because it may cause fire or electric shock.

•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.

EN-3