Controls and functions
Projector
1
2
3
4
5
6
7
8
9
10
11
12
13
11
1.Focus ring
Adjusts the focus of the projected image. See "Fine- tuning the image size and clarity" on page 25 for details.
2.Zoom ring
Adjusts the size of the image. See
3.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 53 for details.
4.SOURCE
Displays the source selection bar. See "Switching input signal" on page 24 for details.
5.
Left/BLANK
Used to hide the screen picture. See "Hiding the image" on page 33 for details.
6.MODE/ENTER
Selects an available picture setup mode. See "Selecting a picture mode" on page 29 for details.
Enacts the selected
7.MENU/EXIT
Turns on the
8.TEMPerature indicator light
Lights up red if the projector's temperature becomes too high. See "Indicators" on page 53 for details.
9.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 53 for details.
10.AUTO
Automatically determines the best picture timings for the displayed image. See
11.Keystone/Arrow keys ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 26 for details.
12.
Right/ 
Activates panel key lock. See "Locking control keys" on page 33 for details.
When the
13.II POWER
Toggles the projector between standby mode and on. See "Starting up the projector" on page 21 and "Shutting down the projector" on page 34 for details.
