Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.
Important:
•Make sure that the connected device is turned off before starting connection.
•Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.
•When the projector and the connected devices are located too close to each other, the projected image may be af- fected by their interference.
•See the owner's guide of each device for details about its connections.
Projector + AV device
AUDIO IN (1/2)
VIDEO IN
to video output
to audio output
VCR, etc.
to
Important:
•Match the colors of the video and audio plugs on the AV cable with those of the terminals.
•Speaker output is mono.
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for
Audio cable (option)
DVD player or HDTV decoder |
Y CB(PB) CR(PR) | to audio output |
BNC - RCA connector (option)
No connection
G | B | R | HD/CS | VD |
Mini
COMPUTER/COMPONENT
VIDEO IN
Important:
•The terminal's names Y, PB, and PR are given as examples of when a HDTV decoder is connected.
•The terminal's names vary depending on the connected devices.
•Use a Mini
•Image may not be projected correctly with some DVD players.
•When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.
•Speaker output is mono.
EN - 10
