Projector exterior view
Front/upper side
1 | 6 |
| |
2 |
|
9
3 |
|
4 |
|
| 7 |
5 | 8 |
Rear/lower side
10 | 11 | 12 | 13 | 14 |
18
15
16
17
19
1.External control panel
(See "Projector" on page 8 for details.)
2.Lamp cover
3.Vent (heated air exhaust)
4.
5.Lens cover
6.Focus ring and Zoom ring
7.Front IR remote sensor
8.Projection lens
9.Vent (air intake)
Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns.
10.Serial control port
11.RGB signal output socket
12.RGB (PC)/Component Video (YPbPr/ YCbCr) signal input socket x 2
13.
14.Audio input jack Audio output jack
15.Kensington lock
16.AC power cord inlet
17.
18.Security bar
19.Rear adjuster foot
Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below.
Kensington Technology Group 2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone: +1-
ENGLISH