Mitsubishi Electronics FL7000LU manual How to set the value

4.4Direct commands (Not executable in stand-by mode. Possible only to read during muting.) The direct commands are used for the keystone setting of this projector with the value.

ITEM		Function	Data
	Character	ASCII
VOLUME	VL	56h 4Ch	00–31
KEYSTONE (vertical)	KS	4Bh 53h	±15

How to set the value

Use the character or ASCII code as shown below to set the value.

Character	+	-	0	1	2	3	4	5	6	7	8	9
ASCII	‘2Bh’	‘2Dh’	‘30h’	‘31h’	‘32h’	‘33h’	‘34h’	‘35h’	‘36h’	‘37h’	‘38h’	‘39h’

[Example] When setting the volume to 15. (Figures and symbols enclosed in quotation marks are ASCII codes.):

Sending commands		Status code	Description
from the PC, etc.		from the projector
‘30’ ‘30’ ‘56’ ‘4C’ ‘31’ ‘35’ ‘0D’			Command for setting the volume
00VL15
	‘30’ ‘30’ ‘56’ ‘4C’ ‘31’ ‘35’ ‘0D’		Command receipt confirmation
	00VL15		(Command echo back)

4.5 Function commands (Not executable in stand-by mode. When the mute commands are sent while the splash screen is being displayed, the splash screen is not muted but only canceled.)

The mute commands are used for the mute setting of this projector with the 0 (30h) and 1 (31h).

ITEM			Function		Data
	Character			ASCII
AV MUTE	MUTE	4Dh 55h 54h 45h			0 (OFF), 1 (ON)
SPLIT	SPLT	53h	50h	4Ch 54h	0 (OFF), 1 (ON)
FREEZE	FRZ	46h	52h	5Ah	0 (OFF), 1 (ON)
Function canceling	FNCOFF	46h	4Eh 43h 4Fh 46h 46h

4.6 Menu setting commands (Not executable in stand-by mode. Possible only to read during muting.)

The menu setting commands are used for the menu setting of this projector. If the personal computer sends the command without attaching the data code, the projector attaches to the received command its current setting value as the data code and send it back to the PC.

ITEM			Function			Data
	Character			ASCII
COLOR ENHANCER	CE	43h	45h		0	(AUTO), 1 (PRESENTATION), 2 (STANDARD),
					3	(THEATER), 4 (sRGB), 5 (USER)
COLOR ENHANCER-	CEU1GS	43h	45h	55h 31h 47h 53h	0	(DYNAMIC), 1 (NATURAL), 2 (DETAIL)
USER-GAMMA MODE
COLOR ENHANCER-	CEU1C	43h	45h	55h 31h 43h	±10
USER-RGB-COLOR
COLOR ENHANCER-	CEU1T	43h	45h	55h 31h 54h	±10
USER-RGB-TINT
CONTRAST	PP	50h	50h		±30
BRIGHTNESS	QQ	51h	51h		±30
COLOR TEMP.	A	41h			1	(STANDARD), 2 (HIGH), 3 (LOW), 4 (USER)
COLOR TEMP.-USER	P	50h			±30 ±30 ±30 (R, G, B)
(CONTRAST)
COLOR TEMP.-USER	Q	51h			±30 ±30 ±30 (R, G, B)
(BRIGHTNESS)
COLOR	T	54h			±10
TINT	S	53h			±10
SHARPNESS	R	52h			±5
NOISE REDUCTION	NR	4Eh 52h			0	(OFF), 1 (ON)
CTI	CTI	43h	54h	49h	0	(OFF), 1 (ON)
INPUT LEVEL	IPL	49h	50h	4Ch	±5,
					For DVI input: +0 (NORMAL), +1 (ENHANCED)
LAMP MODE	LM	4Ch 4Dh			0	(STANDARD), 1 (LOW)
AUTO POWER ON	APON	41h	50h	4Fh 4Eh	0	(OFF), 1 (ON)
AUTO POWER OFF	APOF	41h	50h	4Fh 46h	00 (OFF), 05, 10, 15, 30, 60
SPLASH SCREEN	SS	53h	53h		0	(OFF), 1 (ON)

6