4 - 1 Operation condition monitor
•This function displays the ON/OFF/Malfunction status of specific units or group.
•ON/OFF/Malfunction status is shown by the indication corresponding to the unit or group appearing in inverse, normal or blinking display.
•The user may select display items by unit address, group number or group name. Refer to section
•During the user operation mode, this screen returns from any screen if there is no operation for approximately 10 minutes.
(1)Operation Method
•Note that operation is different for each of the following display methods.
1 Press the | GROUP | switch to change the display group in desired opera- |
SELECT |
tion and monitor.
2 When displaying the units in a given group, press the all the units in that group ON or OFF.
| ON/OFF | switch turn |
1 |
|
1 Press the 
switch to move the " " select the group number to be operated.
2 Press the 1 | ON/OFF |
switch to set the displayed group unit is indicated by the |
" " symbol to the on/off mode.
1 Press the 
switch to move the " " symbol. Select the group name to be operated.
2 Press the 1 | ON/OFF switch to set the displayed group unit is indicated by the |
"" symbol to the on/off mode.
*Displays up to the first 3 characters of the set group name.
(2) Display contents
Reverse:ON Normal:OFF
Blinking: Malfunction during units is off
Blinking and Reverse: Malfunction during unit is on.
*When a malfunction occurs, refer to section
