Mitsubishi Electronics G-50A appendix Copying schedule content to other groups memory,memory read

3 Press the	5	/ 8	(CLOCK/PATTERN) switch to select P1 to
P4 or ( - ).
4 Press the	ENTER	switch one time to complete the setting.(The cursor

will move to the next setting position. )

5 Repeat operations 3 and 4 to assign the schedule pattern to each day.

NOTE: When the No.4 function setting is set ON, P4 cannot be set.

(4)Copying schedule content to other groups (memory,memory read)

•The schedule pattern P1 to P3, weekly schedule pattern, set-back value or setting temperature of one group can be recorded and copied to memory or to another desired group.

•Correction and modification can be easily performed after the copy operation is completed.

1 Display the original group on the weekly schedule setting screen.

2 Press the

switch to move the cursor to "M" .

3 Press the ENTER switch one time to record the setting date in memory. *To erase date from the memory, return to the user operation menu

screen.

4 "M" is displayed in reverse with blinking.

5 Press the	SELECT	switch to select the group to which the data is
	GROUP

to be copied.

6 Press the			switch to move the cursor to "MR" .
7 Press the	ENTER	switch to set the contents which will be the same as the

setting data in memory.

The same contents are displayed.

The contents stored in memory can be copied to other groups any number of times because these contents will not be erased even if the memory read operation is used.

-22-