Mitsubishi Electronics G-50A appendix 50A management range

	Item			Specification
		Group	name	Group name can be specified and display on the operation setting screen.
		designation		* Group name setting is need at the initial setting.
		External		Emergency stop/normal, ON/OFF, prohibit/permit for local remote operation can be
Other		signal input		controlled for units being controlled with a non-voltage contact signal input from an
		interface		external source.
		External		When one or more units being controlled are operating, the "ON" signal will be out-
		signal output		put, and if a malfunction occurs in one or more units, the "malfunction" signal will
		interface		be output.
Initial setting (for installation and maintenance)
		Group setting		The group setting operation for units (indoor units local remote controllers, independ-
Connecting				ent OA processing unit, LOSSNAY and slave system controllers) are performed on
			*3	the group setting screen.
information
setting		Interlocked		The interlocked setting for the ventilation equipment as the OA processing unit or
		setting	*3	LOSSNAY , etc to indoor unit is performed on the interlocked setting screen.
		Malfunction		A maximum of the 64 most recent malfunction are displayed on the malfunction log
Monitor		history		monitor.
		Refrigerant		The connected unit address are displayed on the refrigerant monitor screen.
		system monitor
		User setting		Some of the indication and function that appear on the each screen can be specified to
				match the needs of the user.
		Master system
		controller/
		Slave system		Master/Slave setting of the system controller.
		controller		* G-50A does not support slaves.
		setting	*2
Other		Prohibition		The setting of a system controller which the local remote control is prohibition enable or
		setting enable
		/disable		disable.
		The prohibited		Selecting of the prohibited controller which is only local remote controller or both
		controller		local remote controller and the other system controller.
		range setting
		K-control		The system composed of K-control type air conditioner equipment can be controlled
		type	*3	using the K transmission converter (PAC-SC25KAA)

*1 Each operation is available in accordance with the function of unit. *2 Master system controller and slave system controller.

G-50A management range

Another system controller management range

Unit

Unit

* G-50A does not support slaves.

M-NET Gateway management range

Management range of G-50A

Unit

Unit

When G-50A controls another system controller or when the system contains only G-50A :

G-50A is set as the master system controller.

* G-50A performs the group setting in this configuration.

When G-50A is controlled by another system controller : (Example: MJ-300Gateway)

G-50A is set as the slave system controller.

*The group setting is performed by Master system controller.

*3 OA processing unit (LOSSNAY) and the K transmission converter (PAC-SC25KAA) are not included in systems shipped to North America (USA & Canada).

-6-