Preparing your projector (continued)
Bottom side
1
2
3
1Adjustment foot (Front)
2Lamp cover
3Adjustment feet (Rear)
Caution:
Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns.
Remote control
1 | ON | POWER | OFF |
|
|
| |
2 |
| COMPONENT |
|
HDMI | COMP | VIDEO | |
3 | COMPUTER |
|
|
PC |
| ||
4 |
|
|
|
|
| ENTER |
|
5 | MENU |
| ASPECT |
6 |
| AV MEMORY |
|
M1 | M2 | M3 | |
7 | CONTRAST | BRIGHTNESS COLOR TEMP | |
8 | CNT | BRT | C.T. |
9 |
| SHARPNESS |
|
GAMMA | SHARP |
| |
|
| ||
10 | AUTO POSITION | KEYSTONE | |
A.P. | BLANK | KS | |
20
19
18
17
16
15
14
13
12
11
1ON ( I ) button
2HDMI button
3COMPUTER button
4ENTER button
5MENU button
6AV MEMORY buttons
7CONTRAST button*
8SHARPNESS button*
9GAMMA button*
10AUTO POSITION button
11BLANK button
12KEYSTONE button
13BRIGHTNESS button*
14COLOR TEMP button*
15ASPECT button
16Direction buttons
17
18VIDEO button
19OFF (
) button
20COMPONENT button
* : See below for the picture quality adjusting buttons.
Important:
•When you press any button on the remote control, the buttons on the remote control are lit. Wait approx. 5 seconds after releasing the button to turn them off.
•The direction buttons are used for the keystone adjustment
and fine adjustment ( and buttons only).
Using the picture quality adjusting buttons
When you press any of the picture quality adjusting buttons, the screen for adjusting the picture quality appears. Ad- just the picture quality by pressing the and buttons. The picture quality adjustment can be made alternatively in the IMAGE menu. (See page 24.) Items in the menus are shown in parentheses below.
CONTRAST (CONTRAST) ………… Adjusts the contrast of the projected image.
BRIGHTNESS (BRIGHTNESS) …… Adjusts the brightness of the projected image.
COLOR TEMP (COLOR TEMP.) …… Selects one of the preset color temperatures. Color adjustment of USER mode is
also available. (Refer to page 28.)
GAMMA (GAMMA MODE) ………… Selects one of the preset gamma mode. Adjustment of USER mode is also
available. (Refer to page 28.)
SHARPNESS (SHARPNESS) ……… Adjusts the sharpness of the projected image.
