4.Command list
4.1Operation commands (Not executable in
The operation commands are used for the basic operation setting of this projector. They may not be executed while the signals are changed. The operation commands have no data codes.
ITEM | Function | Note | ||
Character | ASCII | |||
|
| |||
POWER ON | ! | 21h | This command is invalid for 1 minute after the power is turned off. | |
POWER OFF | " | 22h | This command is invalid for 1 minute after the power is turned on. | |
INPUT COMPUTER 1 | _r1 | 5Fh 72h 31h | This command will not be executed in | |
INPUT COMPUTER 2 | _r2 | 5Fh 72h 32h | This command will not be executed in | |
INPUT DVI | _d1 | 5Fh 64h 31h | This command will not be executed in | |
INPUT VIDEO | _v1 | 5Fh 76h 31h | This command will not be executed in | |
INPUT | _v2 | 5Fh 76h 32h | This command will not be executed in | |
[Example] When setting the input signal to COMPUTER 1. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands |
| Status code | Description |
from the PC, etc. |
| from the projector | |
|
| ||
‘30’ ‘30’ ‘5F’ ‘72’ ‘31’ ‘0D’ |
|
| Command for setting the input signal |
00_r1 |
|
| to COMPUTER 1 |
| ‘30’ ‘30’ ‘5F’ ‘72’ ‘31’ ‘0D’ | Command receipt confirmation | |
| 00_r1 |
| (Command echo back) |
4.2Reading command diagram
The projectors operating status, such as
ITEM | Character |
|
|
| ASCII |
| ||
Function | Data (Receive) |
| Function |
| Data (Receive) | |||
|
|
| ||||||
POWER ON | vP | 1 | 76h | 50h |
|
| 31h |
|
POWER OFF | vP | 0 | 76h | 50h |
|
| 30h |
|
INPUT COMPUTER 1 | vI | r1 | 76h | 49h |
|
| 72h | 31h |
INPUT COMPUTER 2 | vI | r2 | 76h | 49h |
|
| 72h | 32h |
INPUT DVI | vI | d1 | 76h | 49h |
|
| 64h | 31h |
INPUT VIDEO | vI | v1 | 76h | 49h |
|
| 76h | 31h |
INPUT | vI | v2 | 76h | 49h |
|
| 76h | 32h |
POWER ON/OFF IMPOSSIBLE | vPK | 0 | 76h | 50h | 4Bh |
| 30h |
|
POWER ON/OFF POSSIBLE | vPK | 1 | 76h | 50h | 4Bh |
| 31h |
|
NO SIGNAL SUPPLIED | vSM | 0 | 76h | 53h | 4Dh |
| 30h |
|
SIGNAL SUPPLIED | vSM | 1 | 76h | 53h | 4Dh |
| 31h |
|
Use the following commands to obtain the values of the items in the INFORMATION menu.
ITEM |
|
| Function |
|
|
|
| Data (Receive) | |
Character |
|
| ASCII |
|
|
| |||
|
|
|
|
|
|
| |||
LAMP TIME (LOW) | vLE | 76h | 4Ch 45h |
|
|
| hhhhmm | ||
RESOLUTION | vRESO | 76h | 52h | 45h | 53h | 4Fh |
| HHHHxVVVV | |
VERTICAL FREQUENCY | vVFREQ | 76h | 56h | 46h | 52h | 45h | 51h | ***.** | |
HORIZONTAL FREQUENCY | vHFREQ | 76h | 48h | 46h | 52h | 45h | 51h | ***.** | |
SYNC. TYPE | vSYNCT | 76h | 53h | 59h | 4Eh 43h 54h | 0 | (NO SIGNAL), 3 (3wire), 4 (4wire), | ||
|
|
|
|
|
|
|
| 5 | (5wire), 6 (SCART) |
“hhhh” and “mm” represent hours and minutes respectively.
“HHHH” and “VVVV” represent the horizontal and vertical resolutions respectively.
Use the following commands to obtain other information.
ITEM |
| Function |
| Data (Receive) | ||
Character |
|
| ASCII | |||
|
|
|
| |||
Model name | vMDL | 76h | 4Dh | 44h | 4Ch | ****************(within 16 characters) |
Serial number | vS/N | 76h | 53h | 2Fh | 4Eh | *******(within 7 characters) |
Input source | vSOUCE | 76h 53h 4Fh 55h 43h 45h | r1 r2 d1 v1 v2 | |||
4
