Mitsubishi Electronics HD8000 manual Password lock commands, 00CEU1GS2, Pslock

[Example 2] When setting the CONTRAST R of the COLOR TEMP.-USER to +10, the CONTRAST G to 0, and the CONTRAST B to -5. (Figures and symbols enclosed in quotation marks are ASCII codes.):

Sending commands	Status code	Description
from the PC, etc.	from the projector
‘30’ ‘30’ ‘50’ ‘2B’ ‘31’ ‘30’ ‘2B’ ‘30’ ‘30’ ‘2D’ ‘30’ ‘35’ ‘0D’		Command for setting the
00P+10+00-05		picture control
	‘30’ ‘30’ ‘50’ ‘2B’ ‘31’ ‘30’ ‘2B’ ‘30’ ‘30’ ‘2D’ ‘30’ ‘35’ ‘0D’	Command receipt confirmation
	00P+10+00-05	(Command echo back)

[Example 3] When checking the TINT setting (when the TINT is set to +10). (Figures and symbols enclosed in quotation marks are ASCII codes.):

Sending commands	Status code	Description
from the PC, etc.	from the projector
‘30’ ‘30’ ‘53’ ‘0D’		Command for checking the
00S		TINT setting
	‘30’ ‘30’ ‘53’ ‘2B’ ‘31’ ‘30’ ‘0D’	Check result (+10)
	00S+10

[Example 4] When setting the GAMMA MODE of the COLOR ENHANCER-USER to DETAIL. (Figures and sym- bols enclosed in quotation marks are ASCII codes.):

Sending commands	Status code	Description
from the PC, etc.	from the projector
‘30’ ‘30’ ‘43’ ‘45’ ‘55’ ‘31’ ‘47’ ‘53’ ‘32’ ‘0D’		Command for setting the
00CEU1GS2		picture control
	‘30’ ‘30’ ‘43’ ‘45’ ‘55’ ‘31’ ‘47’ ‘53’ ‘32’ ‘0D’	Command receipt confirmation
	00CEU1GS2	(Command echo back)

4.7Password lock commands

The password lock commands control the password lock. The password lock enabling or disabling command is sent with a 4 to 8-digit password comprised of any figures 1 to 4 added to the end of the data code. When the password lock is enabled or disabled successfully, the projector sends a return command comprising the data code, password, and “1” at the end. When enabling or disabling the password lock fails, it sends a return com- mand with “0” at the end. There is no reconfirmation of the password. The password input command is for en- abling projection of image when password lock has been set to DISPLAY INPUT. The password input command is sent with a 4 to 8-digit password comprised of any figures 1 to 4 at the end.

ITEM			Function	Data
	Character		ASCII
Password lock enabling/	PSLOCK	50h	53h 4Ch 4Fh 43h 4Bh	0**** (Disabling), 1**** (DISPLAY INPUT),
disabling				2**** (MENU ACCESS), 3**** (SPLASH ID SCREEN)
Password input	PASS	50h	41h 53h 53h	****

**** is a 4 to 8-digit password comprised of any figures 1 to 4.

[Example] When enabling the password lock of DISPLAY INPUT (in the case that the password is 123412):

Sending commands	Status code	Description
from the PC, etc.	from the projector
‘30’ ‘30’ ‘50’ ‘53’ ‘4C’ ‘4F’ ‘43’ ‘4B’ ‘31’ ‘31’ ‘32’ ‘33’ ‘34’ ‘31’ ‘32’ ‘0D’		Command for enabling the
00PSLOCK1123412		password lock of DISPLAY INPUT
	‘30’ ‘30’ ‘50’ ‘53’ ‘4C’ ‘4F’ ‘43’ ‘4B’ ‘31’ ‘31’ ‘32’ ‘33’ ‘34’ ‘31’ ‘32’ ‘31’ ‘0D’	Response informing that the
	00PSLOCK11234121	projector succeeded in enabling the
		password lock of DISPLAY INPUT

8