11
Playback

Setting Up Your VCR to Playback/Recording the

Digital Broadcast in D-VHS (digital) Format

1Make sure that your VCR and the integrated HDTV or the IEEE 1394-equipped
HDTV receiver is connected with an IEEE 1394 cable.
2Turn on the IEEE 1394-equipped HDTV receiver.
3Turn on your TV and switch the input of the TV to the correct input of the IEEE
1394-equipped HDTV receiver.
4Press POWER on the VCR to turn the power on.
To go back to viewing the picture from the TV, set your TV input to the previous
ANTENNA input position.
If you do not switch the integrated HDTV or the IEEE 1394-equipped HDTV
receiver to the correct external input, the screen to the right will be displayed on the
screen when you try to watch a digital broadcast.

1394 connection list

When you connect an integrated HDTV, an IEEE 1394-equipped HDTV receiver or
a D-VHS VCR to the HS-HD1100U, you can see the list of connected TVs,
receivers or VCRs on the 1394 connection list menu (up to 5 devices). The
integrated HDTV and the IEEE 1394-equipped HDTV receiver will be displayed as
TUNER, and the D-VHS VCR will be shown as VCR. For the device which was
connected to the HS-HD1100U before but now it is not connected, lost connection
will be displayed. The device which was first connected to the HS-HD1100U will be
shown as d1, and connected fifth will be shown as d5. When you want to remake
the list, press CANCEL on the VCR remote control. In this case, the order of the
devices on the list will be changed.
IMPORTANT
When you connect Mitsubishi integrated HDTVs, for example, WS-55859,
WS-65869, WS-55909, WS-65909 or WS-73909, they will be displayed as - -
- - - in 1394 connection list menu. When you use these TVs, they will control
the HS-HD1100U. So to use the function of the HS-HD1100U, use the TV to
operate the VCR.
displaying 1394 connection list
1Press MENU on the remote control. VCR Main Menu comes up.
2Press the ADJUST buttons on the remote control to select 1394 connection list.
Press ENTER. 1394 connection list menu appears.

Setting Up Your VCR to Playback/Recording the

Tape in VHS (analog) Format

The first thing you need to do is set up your VCR so that you can see the picture
coming from the VCR. It’s important to take a few minutes to set up your VCR
correctly before you try to use it. Based on the type of TV that you have, choose
one of the following:

TV with Audio/Video Inputs

1Turn on your TV and switch it to the correct external input. For most Mitsubishi
TVs, this means pressing the TV’s INPUT button until you see the words Ext-1
or Input-1 on the screen. If you do not have a Mitsubishi TV, please refer to
your TV Owner’s Guide for this procedure.
2Turn the VCR on by pressing POWER.
213
546
879
0
IEEE 1394
INPUT
VCR
POWER
PWR.
HS
STD
VCR
HMS
ƒ1394 connection list 
d1 TUNER lost connection
d2 TUNER lost connection
d3 TUNER now connecting
d4 TUNER now connecting 
Press CANCEL to renumber
Use ADJUST to select,
and ENTER.
Press MENU to go back.
This is a digital
recording.
You cannot view it
through this input.
Please select IEEE1394
connection