36
Program Caution
If your VCR is set to record in VHS format, but the power is still ON within 3
minutes before timer recording starts, this screen will appear to remind you to turn
off the VCR.
If the VCR is still turned on 12 seconds before the start time of the recording, that
timer recording will be cancelled.
TV Programs that End on the Day After
If you want to start the recording at 11:00 PM and end it at 2:00 AM the next day,
simply set the start time to 11:00 PM on the recording start day and the end time to
2:00 AM. There is no need to change the day of the week.
Program Skip Using Menus
Sometimes you may want to skip one day of a timer recording but do not want to
erase it. Program skip will prevent the recording, for that day only, of a program
you have scheduled to record every day or every week.
1Press MENU on the remote control. Your VCR will turn on and VCR Main
Menu will appear. Press the ADJUST buttons to select Program to record.
Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press
the ADJUST buttons to place the cursor arrow next to the program you wish to
skip.
3Press STOP. The cursor arrow will change to a
X
.
4Press MENU twice to turn off the menus.
To resume recording every day or every week, change the X to the cursor arrow by
following steps 1 to 4 again.
Program Skip Using the POWER Button
If you have entered only one program into your VCR’s memory, you can skip the
program without going into the VCR’s menus. Simply press POWER on the front
panel once. The programmed recording light will turn off and the program will be
skipped. If you decide not to skip the program, press POWER on the front panel
twice; the programmed recording light will light up again.
Changing Timer Recording Settings
1Press MENU on the remote control. Your VCR will turn on and VCR Main
Menu will appear. Press the ADJUST buttons to select Program to record.
Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press
the ADJUST buttons to place the cursor arrow next to the program you wish to
change. Press ENTER. You will see the Program to record setting menu.
3Press ENTER repeatedly to select the item you wish to change. Press the
ADJUST buttons to change it. Then press ENTER repeatedly to return the
altered program to the Recap screen.
4Press MENU twice to turn off the menus. Then press POWER to turn off the
VCR. Make sure the programmed recording light is on.
Timer Recording
REC in 3 min 
Turn off VCR
program caution
¬Program to record
CH DAY ON OFF
2 MO11 11:30am 1:30pm SP
10 TH14 9:00pm 10:00pm EP
X 2 M-F 8:00am 8:30am SP
--- -- --:-- --:-- SP
To turn skip on/off use STOP
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
CH DAY ON OFF
2 MO11 11:30am 1:30pm SP
10 TH14 9:00pm 10:00pm EP
§ 2 M-F 8:00am 8:30am SP
--- -- --:-- --:-- SP
To turn skip on/off use STOP
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
CH DAY ON OFF
§ 2 MO11 11:30am 1:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
¬Program to record
ƒChannel 2
ƒDay Monday 11
ƒStart time 11:30am
ƒStop time 1:30pm
ƒRecord speed EP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
POWER
PROG REC
PROG REC