31
¬Program to record
ƒChannel 2
ƒDay Monday 11
ƒStart time 11:30am
ƒStop time 1:30pm
ƒRecord speed SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Timer Recording
Conventional VCR Timer Recording
1Load a tape with its erasure prevention tab intact into the VCR.
2Press MENU. VCR Main Menu appears on your screen. Use the ADJUST
buttons to select Program to record. Press ENTER.
If there is at least one programmed recording already entered, you will see the
Recap screen. Wait 4 seconds and the VCR Plus+ system menu will appear.
IMPORTANT
If you have already programmed 8 recording events, Program memory is full
will appear on your screen for 3 seconds and then the Recap screen will
appear. Use CANCEL to erase an entry before you can add another one.
3VCR Plus+ system menu appears. See page 33 to learn how to program with
VCR Plus+ system. To pass this screen, press ENTER.
4Program to record menu appears. Press the ADJUST buttons to choose the
channel you would like to record; for example, channel 2. Press ENTER.
• If you are using a cable box, enter the channel number on which the cable
box sends a signal to your VCR (usually channel 3 or 4).
• To record from an external source, press INPUT or press the ADJUST
buttons to:
Select External L1 for a source connected to the rear panel.
Select External L2 for a source connected to the front panel.
5Day will flash. Press the ADJUST buttons to choose the day on which you
want to record; for example, Monday the 11th.
Your choices are:
• a single day up to one month away.
• every day from Monday through Friday; for example, to tape a soap opera.
To program, press the ADJUST buttons until Monday-Friday appears.
• the same day every week; for example, to tape your favorite weekly sitcom.
To program, press the ADJUST buttons until Every and the desired day of the
week appears.
Press ENTER once you have made your choice.
6The hour numbers of the start time will flash. Press the ADJUST buttons to set
the hour when recording is to start. Press ENTER.
7The minute numbers of the start time will flash. Press the ADJUST buttons to
set the minutes when recording is to start. Press ENTER.
8Set the stop time the same way as the start time, using steps 6 and 7.
9Press the ADJUST buttons to set the recording speed:
SP = standard play; EP = extended play; AUTO = auto. Auto speed
programming is discussed on page 35. Press ENTER.
¬Program to record
ƒChannel 2
ƒDay Monday 11
ƒStart time 11:00am
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
ƒChannel 2
ƒDay Monday 11
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
ªVCR Main Menu
¬Program to record
ƒ1394 connection list
√Customize choices
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select 
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
--------
or press ENTER to program.
Press MENU to go back.
¬Program to record
ƒChannel 2
ƒDay --
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
CH DAY ON OFF
§ 10 TH14 9:00pm 10:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen