Quick Start
To attach the MultiSync® LCD monitor to your system, follow these instructions:
1.Turn off the power to your computer.
2.For the PC: Connect the
For the Mac: Connect the MultiSync LCD1720M™ Macintosh cable adapter to the computer (Figure B.1). Attach the
NOTE: To obtain the MultiSync LCD1720M Macintosh cable adapter, call
3.Connect the
4.Connect the audio cable to “AUDIO INPUT” on the back of the monitor and the other end to the “Audio out” terminal of the computer (Figure D.1).
5.Headphones may be connected to the “Headphones” output on the front of the monitor’s bezel marked “
” (Figure E.1). While the headphones are connected, the sound from the speakers will be disabled. Headphones can be purchased from your local electronics store.
6.Connect one end of the power cord to the MultiSync LCD Series monitor and the other end to the power outlet (Figure C.1).
NOTE: If you use this monitor at
7.Turn on the monitor with the front power switch (Figure F.1) and the computer.
8.To complete the setup of your MultiSync LCD monitor, use the following OSM™ controls:
•Auto Adjust Contrast
•Auto Adjust
Refer to the Controls section of this User ’s Manual for a full description of these OSM controls.
NOTE: For download information on the Windows® 95/98/Me/2000/XP INF file for your MultiSync LCD1720M monitor, refer to the References section of this User’s Manual.
NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.
3
