Mitsubishi Electronics LT-3050 manual Connecting an Antenna or Wall Outlet Cable

Connecting an Antenna or Wall Outlet Cable

Note: The TV side panel and connections shown here are for reference only and may vary by model.

��� �������	�� ���� ����� � �����	Separate UHF and VHF Antennas
��������� ������

(Figure 1)

���� ���� ����

��������

�������

�� �����

���� ���� ����

1.Connect the UHF and VHF antenna leads to the UHF/VHF combiner.

2.Push the combiner onto ANT on the TV side panel.

��� ��� ��

�� ���

��������

���	�
���

���� ����

�

UHF/VHF combiners are not provided with

the TV. They are available at most electronic stores.

Note: This TV will only be able to provide an analog signal through ANT on the TV side panel.

Figure 1. Connecting separate UHF and VHF antennas.

Note: See page 5 for Outdoor Antenna Grounding

��� ��� ����	�� ���
���� ����
	������� �����

�

�

Additional connection cables are not provided with the TV. They should be available at most electronic stores.

Twin Lead Antenna, Coaxial Lead

�� ���� ����� � �����

Antenna, or Wall Outlet Cable

(Figure 2)

For antenna with twin flat leads:

1. Connect the 300Ohm twin leads to the transformer.

2. Push the 75Ohm side of the transformer onto ANT on the TV side panel.

300Ohm to 75Ohm matching transformers are not provided with the TV. They are available at most electronic stores.

�

�������� ��� ��� �� �� ���

�������� �����������

Figure 2. Connecting twin lead antenna, coaxial lead antenna, or wall outlet cable.

Note: See page 5 for Outdoor Antenna Grounding

For cable or antenna with coaxial lead:

3.Connect the incoming cable to ANT on the TV side panel.

Note: This TV will only be able to provide an analog signal through ANT on the TV side panel.

14

LT3050_OG_v5.ind 14

04.1.23, 11:43 AM