Mitsubishi Electronics LT-3050 manual Connecting a DVD Player or Other S-Video Device

Connecting a DVD Player or Other S-Video Device

Note: The TV side panel and connections shown here are for reference only and may vary by model.

� ���

�����

DVD Player/Video Game with Component Video

�

�

�

�

�� ���� ����� � �����

(Figure 9)

1. Connect the Component Video cables from

(YCb Cr or YPbPr) VIDEO OUT on the back of

the DVD player to COMPONENT (1 or 2) on

the TV side panel. The correct connections are:

A. Y to Y

B. Cb or Pb to Pb

C. Cr or Pr to Pr

							��� ���� �����
�
�				����� ���			�� ��
	�	�����	��� �� ��������	���	�������������	���� �� �� ��
						��� ������
�			������			����� �������
	� �			�		����� �
						�
�		�
	� �			�		���
							�
	����� ���		��������� ��������	�����	������� �������

2. Connect a set of audio cables from AUDIO OUT

on the back of the DVD player to COMPONENT

AUDIO Input (1 or 2) on the TV side panel.

Figure 9. Connecting a DVD Player with Component Video.

See Appendix B, page 58, for component video signal compatibility information.

For digital audio connections, see your DVD and A/V receiver Owner’s Guides.

•The red cable connects to the R (right)channel

•The white cable connects to the L (left) channel

NOTE: Some video game systems support component connections. Please refer to your video game console Owner’s Guide.

NOTE: If your DVD player supports progressive scan playback, be sure to set your player accordingly. Please refer to your DVD player’s

�

���

�����

�� ���� ����� � ����

�

Owner’s Guide.

Other S-Video Device

(Figure 10)

1.Connect a S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV side panel.

2.Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1 or INPUT-2 on the TV side panel.

				��� ������� ������
	�����	����� ���	����� ��	����� ���
		�	�	�����
	���	�	�
�
		�	�

Figure 10. Connecting an S-Video Device.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

�

If your S-Video Device is mono (non-stereo), connect only the white (left) cable.

18

LT3050_OG_v5.ind 18

04.1.23, 11:43 AM