Mitsubishi Electronics LVP-SA51U user manual Specifications, Kensington Lock

Specifications

Type	LCD projector
Model	LVP-SA51U
Rated power supply	AC100V ~ 240V, 50 / 60Hz
Rated input	2.3 A
LCD panels	0.9-inch LCD panel: 3 pieces (for R, G, B)
	Pixels	800 ⋅	600 = 480,000 pixels
	Total	1,440,000 pixels
	Active pixel rate: 99.99 % or more (each panel)
Colors	16,770,000 colors
Projection lens	F 2.3~2.6 f = 36.0 mm ~ 43.2 mm
Light source lamp	150 W UHP (2, 000 Hours)
Picture size	40 inch ~ 300 inch (aspect ratio 4:3)
PC compatibility	Resolution : 640 x 400 - 800 x 600 + Compressed 1024 x 768
	Sync on Green available
Video compatibility	NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
	DVD (Component) / HDTV (1080i) / 720p / (525p)
Audio output	1 W mono
Speaker	3 cm x 4 cm square type (8Ω 1W)
S-video input			Ω	(negative sync.)
	Luminance signal: Vp-p=1.0V 75
	Chroma signal: Vp-p=0.286V 75Ω			(burst signal)
Video input	Vp-p=1.0V 75Ω		(negative sync.)
Audio inputs	350 mVrms, 10kΩ		or more
Analog RGB input	RGB: Vp-p=0.7V 75Ω (negative sync.)
(mini D-SUB 15P)	YCBCR: Y: Vp-p=1.0V (negative sync.)				CBCR: Vp-p=0.7V
	HD/CS : TTL level (positive or negative)
	VD : TTL level (positive or negative)
Control connector	Serial (Mini DIN 8P female connector) RS-232C standards
Outside dimensions	242 mm ⋅ 79 mm ⋅ 294 mm (9.5 inch ⋅				3.1 inch ⋅ 11.6 inch)
	(width ⋅	height ⋅	depth)	Legs and lens are not included.
Weight	Approx.	3.4 kg (7.5 lbs)
Length of power cord	2.9m (9.5 feet)
Temperature, humidity	+41° F (+5° C) ~ +95° F (+35° C), 30~90%
(performance guarantee)

Kensington Lock

This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact to Kensington Technology Group as shown below.

Kensington Technology Group

2855 Campus Drive

San Mateo, CA 94403, U.S.A.

Phone : (650)572-2700 Fax : (650)572-9675

EN – 26