Overview of the projector
| focus ring |
| Use to adjust the focus by turning it. See page 16. |
| zoom ring |
| Use to magnify (or reduce) by turning it. See page 16. |
| remote control sensor (Front / Rear) |
| exhaust slits |
| PC card eject |
| Press to eject the PC card. See page 23. |
| PC card slot |
| This is where you insert the PC card. See page 23. |
| PC card slot cover button |
| Press down to open the PC card slot. See page 23. |
| release button |
handle | Press to adjust the angle of projection. See page 11. |
Hold here to carry this projector.
power
Use to turn the projector on or off when MAIN POWER is on. To turn the projector off, press this button twice.
Important:
When the LAMP indicator blinks in green, the power switch cannot be used to switch “ON” and “OFF.” Begin operation only after the indicator has stopped blinking.
See indicator table below for more information.
menu
Use to project menu display.
enter
Use for MENU setting. See page 17.
SOURCE
LAMP RGB
TEMP VIDEO
CARD | PC CARD |
MENU | direction |
|
|
|
|
| |
| Normal | On Menu | On PC card |
| Adjust FINE | Set item | Select previous image (Left) |
| ENTER |
|
|
| Adjust FINE (+) | Set item | Select next image (Right) |
| – | Select item (up) | Select INDEX or FILE |
| – | Select item (down) | Select INDEX or FILE |
| VOL |
|
|
+, -
Press to turn the volume up or down. During playback of PC card, use to select group of the PC card.
input source (RGB, VIDEO, PC CARD)
Use to select the input source you wish to watch. You can select PC CARD when the CARD indicator ON.
indicators
POWER( ) | LAMP | TEMP | CARD | Condition |
Steady red |
|
|
| |
Steady green Brinking green |
|
| Power is TMON∫. | |
| } Steady green |
|
|
|
Steady green Steady green Blinking red |
| Abnormal temperature warning (high temperature).*1 | ||
Steady red |
| Steady red |
| Abnormal |
|
|
|
| The source lamp will be also turned off. |
Steady green | Blinking red /green |
|
| Lamp duration warning. (Lightning duration total about 1,500 hours.) *2 |
Steady red | Steady red |
|
| Lamp |
Steady green | Steady green |
| Steady green PC card inserted, off then no PC card. | |
*1 : In the condition, the sign of “TEMP!!” blinks red on the screen.
*2 : When the lamp has been used for about 1,900 hours, the message “LAMP!!” will appear on the screen.
6
