Indicators
The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer.
LAMP
TEMP
CARD
SOURCE MENU
RGB
ENTER
VIDEO
PC CARD
VOL
INDICATOR | SHOWS | CONDITION | POSSIBLE SOLUTIONS | ||
|
| • Unusual temperature |
|
| |
|
| The power is turned off |
|
| |
|
| and the POWER indicator |
|
| |
|
| lights up red. |
|
| |
|
| • The ventilation slots or air | • Remove the object from | ||
|
| filter is clogged with dust | the ventilation slots. | ||
TEMP |
| or debris. |
|
| |
blinking red | • The fan has stopped due | • Pull out the power | |||
INDICATOR | |||||
| to an impediment. | plug and remove the | |||
|
|
| object. If you cannot, | ||
|
| • The room temperature is | consult your dealer. | ||
|
| • Relocate the projector | |||
|
| too high. | to a cooler place. | ||
|
| • The filter is dirty. | • Clean the filter. | ||
|
|
|
|
| |
| Steady green | Normal | - |
| |
|
|
| |||
|
|
|
|
| |
| Blinking red/green | Lamp is almost used up. |
|
| |
LAMP | or Blinking red |
| Replace the lamp. | ||
|
| ||||
INDICATOR | Steady red | • Lamp is used up. | Exchange with a new | ||
|
| lamp if the same | |||
|
| • The power is not turned on. | problem recurs. | ||
|
| (Power indicator lights up red.) |
|
| |
|
|
|
|
| |
| Steady red | Standby | - |
| |
|
|
|
|
| |
| Steady green | - |
| ||
|
|
|
| ||
POWER |
| • The filter cover is not closed. | • Close the cover cor- | ||
INDICATOR | Blinking red/green | (When the TEMP indicator and | rectly. | ||
| or Blinking red | the LAMP indicator are off.) | • Contact your dealer. | ||
|
| • Abnormal | |||
|
| (When the TEMP indicator |
|
| |
|
| or the LAMP indicator- |
|
| |
|
| steady on or blinking.) |
|
| |
|
|
|
|
| |
36
