Mitsubishi Electronics LVP-X400BU user manual Menu operation, Image, Installation, Feature

Menu operation (continued)

1IMAGE

CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher			Opt	XGA60
as the number increases.
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as	IMAGE
the number increases.		CONTRAST		0
COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page		BRIGHTNESS		0
18.		COLOR MATRIX		USER
COLOR TEMP.. .. Adjusts color temperature. See page 18.		COLOR TEMP.		STANDARD
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes		SHARPNESS		0
sharper as the number increases.		TINT		0
TINT .................... Adjusts the color balance in the image. The color balance		COLOR		0

	of the image shifts green as the number increases and
	shifts to purple as the number decreases (displays only when the source is selected to
	VIDEO).
	• When the TV50 (PAL, SECAM) signal is inputted, you cannot adjust the TINT.
COLOR	Adjusts the color intensity of the image (displays only when the source is selected to VIDEO).

2INSTALLATION

KEYSTONE ........ Adjusts keystone correction of the image. If the image has				Opt	XGA60
keystone distortion, select the approximate setting.
	INSTALLATION
AUTO POWER ON ..... To select whether to boot up automatically when the power is
turned on external to the projector. In this case, the main			KEYSTONE		0˚
			AUTO POWER		OFF
power switch of the projector has to be ON. Set this when the
			ON
			AUTO POWER		OFF
projector is hanging on the ceiling.			OFF
• The projector is in stand-by mode when the lamp is not			SPLASH SCREEN		ON
		ON
on. In this case, use the remote control to turn on the			IMAGE REVERSE		OFF
lamp.

AUTO POWER OFF .. Use to select the length of time before projector switches to stand-by when there is no input signal selected source.

SPLASH SCREEN . Use to display the splash screen on the screen when the power is turned ON.

IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is used to rear projection. MIRROR, INVERT is for rear projection ceiling mount.

3FEATURE

MENU POSITION . Use to select the position where the menu is displayed,					Opt
(upper left) or (lower right).
	FEATURE
EXPAND MODE .. Selects the mode of enlarging screen. See page 21.
FRAME POSI. .... Sets the position of sub screen. See page 21.				MENU POSITION
VIDEO SIGNAL ... When AUTO is set, the appropriate video format is		A		EXPAND MODE
		A
automatically selected according to the input signal. If the		A		FRAME POSI.
			A
image does not appear correctly, select the desired video	?			VIDEO SIGNAL
format manually.
				ANAMORPHIC
ANAMORPHIC ... Set ON when displaying DVD discs which are recorded in
		A Ë		LANGUAGE
letter boxed images.
				RESET ALL

LANGUAGE ....... Use to select the language for the projector display such as

menu. ( / English / Español / Deutsch / Français / Italiano / ) RESET ALL ........ Use to reset the MENU setting (except LANGUAGE).

XGA60

1.

1.

3.

AUTO

OFF

English

OK

•When the LANGUAGE in FEATURE menu is set to English and NTSC video format is selected, the bright- ness is decreased 15 points by set-up cancel function for U.S. (The indicated value is not changed.) The image becomes darker, but this is not a failure of the projector.

EN – 16