Mitsubishi Electronics LVP-X400BU Volume commands, Remote commands, How to set the grade

5) Volume commands

The volume commands execute the volume setting of this projector with the value.

ITEM	ASCII	HEX	VALUE
VOLUME	VL	56h 4Ch	00 - 31

How to set the grade

Use ASCII letters code to set the grade for setting data. Please refer to the table below for HEX code.

ASCII	'0'	'1'	'2'	'3'	'4'	'5'	'6'	'7'	'8'	'9'
HEX	30h	31h	32h	33h	34h	35h	36h	37h	38h	39h

[Example] Set the volume to 15 (Standard value) (' 'is for ASCII code)

Sending commands	Status code from		Meaning
from the PC etc.	projector
30 30 56 4C 31 35 0D			Command for setting the volume
'0' '0' 'V' 'L' '1' '5' ' '
	30 30 56 4C 31 35	0D	Command received
	'0' '0' 'V' 'L' '1' '5' '	'	(Command echo back)

6) Remote commands

Some remote control operations can be done by remote command codes.

Button's name on remote	ASCII	HEX
+ / VOLUME UP	r06	72h	30h	36h
– / VOLUME DOWN	r07	72h	30h	37h
FOCUS / ZOOM	r0f	72h	30h	66h
KEYSTONE	r43	72h	34h	33h
EXPAND	r02	72h	30h	32h
PIP	r04	72h	30h	34h
{	r53	72h	35h	33h
}	r2b	72h	32h	62h
$	r4f	72h	34h	66h
%	r59	72h	35h	39h
MENU	r54	72h	35h	34h
ENTER	r10	72h	31h	30h
AUTO POSITION	r09	72h	30h	39h
STILL	ra4	72h	61h	34h

[Example] Display MENU selection bar. (' 'is for ASCII code)

Sending commands	Status code from	Meaning
from the PC etc.	projector
30 30 72 35 34 0D		Command as same as MENU button
'0' '0' 'r' '5' '4' ' '
	30 30 72 35 34 0D	Command received
	'0' '0' 'r' '5' '4' ' '	(Command echo back)

3