8) Menu setting commands
The menu setting commands execute the menu setting of this projector. If the personal computer doesn’t send the commands without attaching the data code, the projector which has received the command replays the setting data as data code.
ITEM | ASCII | HEX |
|
|
| VALUE |
| |
CONTRAST | P | 50h |
|
|
| ±30±30±30 (R from G+Main data+B from G) | ||
BRIGHTNESS | Q | 51h |
|
|
| ±30±30±30 (R from G+Main data+B from G) | ||
COLOR MATRIX (MODE) | CMT | 43h | 4Dh | 54h |
| 1, 2, 3 (USER), 4 (OFF) | ||
COLOR MATRIX (R, G, B) | MRGB | 4Dh | 52h | 47h | 42h | ±30±30±30 (R+G+B) | ||
COLOR MATRIX (Y, C, M) | MYCM | 4Dh | 59h | 43h | 4Dh | ±30±30±30 (Y+C+M) | ||
COLOR MATRIX (SATURATION) | MSAT | 4Dh | 53h | 41h | 54h | ±05 |
| |
COLOR TEMP. | A | 41h |
|
|
| 1 (Standard), 2 (High), 3 (Low), 4 (User) | ||
SHARPNESS | R | 52h |
|
|
| ±10 |
| |
TINT | S | 53h |
|
|
| ±10 |
| |
COLOR | T | 54h |
|
|
| ±10 |
| |
KEYSTONE | KS | 4Bh | 53h |
|
| ±00, ±03, ±06, ±09, ±12, ±15 | ||
AUTO POWER ON | APON | 41h | 50h | 4Fh | 4Eh | 0 | (OFF), 1 (ON) | |
AUTO POWER OFF | APOF | 41h | 50h | 4Fh | 46h | 00 (Off) , 05, 10, 15, 30, 60 | ||
SPLASH SCREEN | SS | 53h | 53h |
|
| 0 | (OFF), 1 (ON) | |
IMAGE REVERSE | IR | 49h | 52h |
|
| 0 | (OFF), 1 (Mirror), 2 (Invert), 3 (Mirror invert) | |
MENU POSITION | MP | 4Dh | 50h |
|
| 0 | (Upper left), 1 (Lower right) | |
EXPAND MODE | EX | 45h | 58h |
|
| 1 - 4 |
| |
FRAME POSITION | FM | 46h | 4Dh |
|
| 1 - 5 |
| |
VIDEO SIGNAL | VS | 56h | 53h |
|
| 0 | (AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM) , | |
|
|
|
|
|
| 4 | (4.43NTSC), 5 | |
ANAMORPHIC | SC | 53h | 43h |
|
| 0 | (OFF), 1 (ON) | |
LANGUAGE | LG | 4Ch | 47h |
|
| 0 | ( | ), 1 (English), 2 (Español), 3 (Deutsch) , |
|
|
|
|
|
| 4 | (Frençais), 5 (Italiano), 6 ( ) | |
RESET ALL | RSTALL | 52h 53h | 54h | 41h 4Ch 4Ch |
|
|
| |
MEMORY CALL | MMC | 4Dh | 4Dh | 43h |
| 0 | (AUTO), 1 (USER1), 2 (USER2) | |
HORIZ. POSITION | HP | 48h | 50h |
|
| + (increase), – (decrease) | ||
VERT. POSITION | VP | 56h | 50h |
|
| + (increase), – (decrease) | ||
FINE SYNC. | FN | 46h | 4Eh |
|
| 00 - 39 |
| |
TRACKING | TRK | 54h | 52h | 4Bh |
| + (increase), – (decrease) | ||
COMPUTER INPUT | CIN | 67h | 49h | 4Eh |
| 0 | (RGB), 1 (YCBCR/YPBPR) | |
HOLD | HLD | 48h | 4Ch | 44h |
| 0 | (AUTO), 1 (ON), 2 (OFF) | |
HOLD BEGIN | HLB | 48h | 4Ch | 42h |
| |||
HOLD END | HLE | 48h | 4Ch | 45h |
| 01 - 99 |
| |
CLAMP POSITION | CLP | 43h | 4Ch | 50h |
| 00 - 63 |
| |
CLAMP WIDTH | CLW | 43h | 4Ch | 57h |
| 01 - 63 |
| |
HORIZ. PIXELS | HPL | 48h | 50h | 4Ch |
| 0000 - 9999 | ||
VERT LINES | VLN | 56h | 4Ch | 4Eh |
| 0000 - 9999 | ||
PLL | PLL | 50h | 4Ch | 4Ch |
| 0 | (AUTO), 1 (0), 2 (1), 3 (2), 4 (3), 5 (4), 6 (5), 7 (6), 8 (7) | |
VERT.SYNC | VSC | 56h | 53h | 43h |
| 0 | (AUTO), 1 (ON), 2 (OFF) | |
SHUTTER (U) | SHU | 53h | 48h | 55h |
| 000 - 383 | ||
SHUTTER (L) | SHL | 53h | 48h | 4Ch |
| 000 - 383 | ||
SHUTTER (LS) | SHLS | 53h | 48h | 4Ch | 53h | 000 - 510 | ||
SHUTTER (RS) | SHRS | 53h | 48h | 52h | 53h | 000 - 510 | ||
MUTE | MUTE | 4Dh | 55h | 54h | 45h | 0 | (MUTE ON), 1 (MUTE OFF) | |
How to set the grade
Use ASCII letters code to set the grade for setting data. Please refer to the table below for HEX code.
ASCII | '+' | '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9' | |
|
|
|
|
|
|
|
|
|
|
|
|
|
HEX | 2Bh | 2Dh | 30h | 31h | 32h | 33h | 34h | 35h | 36h | 37h | 38h | 39h |
[Example 1] Set the AUTO POWER ON to ON.
Sending commands | Status code from | Meaning |
from the PC etc. | projector |
|
30 30 41 50 4F 4E 30 0D |
| Command for setting the |
'0' '0' 'A' 'P' 'O' 'N' '1' ' ' |
| AUTO POWER ON to ON |
|
|
|
| 30 30 41 50 4F 4E 30 0D | Command received |
| '0' '0' 'A' 'P' 'O' 'N' '1' ' ' | (Command echo back) |
|
|
|
4
