Mitsubishi Electronics MCF-18TN/24TN specs

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT

AIR FLOW velocity and direction can be selected as required.

˚C

CLOCK

AMPM

ON/OFF TOO TOO

WARM COOL

FAN	STOP
I FEEL COOL
VANE	START
FAN DRY
MODE	HR.
ECONO COOL	MIN.
RESET CLOCK

■To change the AIR FLOW velocity, press the FAN button.

Each time the button is pressed, the fan speed is changed

in sequence:(Low) →(Med.) → (High) → (AUTO)

•Use the(High) notch to cool the room more.

•If the operating sound of the air conditioner disturbs your sleep, use the(Low) notch.

■To change the AIR FLOW blowing direction vertically, press the VANE button.

Each time the button is pressed, the angle of the hori- zontal vane is changed in sequence : 1 → 2 → 3 → 4

→ 5 →(SWING) → (AUTO)

SWING OPERATION

Use the swing operation for the air flow to reach all cor- ners of the room.

Recommended horizontal vane range

Use the (AUTO) position usually.

Use position 1 or 2 in the COOL or DRY mode when adjusting to your requirements.

		COOL
1		DRY
1	2
	2
	3
	4
	5	1	COOL
		1	DRY
		2

Notes:

•In the cooling operation, when the air conditioner is operated with setting the horizontal vane to 4 or 5 for 1 hour, the AIR FLOW direction is automatically set to position 1 to prevent condensed water from dropping.

•Adjust the vertical AIR FLOW direction using the re- mote controller. If the horizontal vane is moved manu-

ally, it may cause trouble.

■To change the horizontal direction of the AIR FLOW

For the floor standing unit	For the ceiling suspended unit
• Change the direction of the vertical vane manually.	• Change the direction of the vertical vane manually.

Adjust the vane before operation starts.

Since the horizontal vane moves automatically, your fingers may be caught.

AUTO AIR FLOW DIRECTION CONTROL OPERATION

•When the AUTO mode is selected with the VANE button, the position of the horizontal vane is automatically set to correspond to the operation mode for effective operation.

For the floor standing unit


(1) COOL, DRY			(2) FAN
• The air is blown out upwards.			• The air is blown out horizontally.

For the ceiling suspended unit

(1) COOL, DRY			(2) FAN
• The air is blown out horizontally.			• The air is blown out downwards.

MCF-18TN/24TN specifications

Mitsubishi Electronics has long been a leader in the field of air conditioning and climate control systems, and the MCF-18TN/24TN series exemplifies their commitment to innovation and efficiency. This series of air conditioning units is designed to provide both residential and commercial spaces with optimal comfort while maximizing energy savings.

One key feature of the MCF-18TN/24TN is its inverter technology. By using advanced inverter compressors, these units can adjust their cooling or heating output to match the specific requirements of a space. This results in less energy consumption compared to traditional fixed-speed units, as the compressor runs at variable speeds depending on the desired temperature. Inverter technology also enhances comfort by reducing temperature fluctuations and ensuring more consistent indoor conditions.

Another standout characteristic is the unit's high energy efficiency rating. The MCF-18TN/24TN is designed to operate efficiently even under varying load conditions. The high EER (Energy Efficiency Ratio) and COP (Coefficient of Performance) ratings mean that users can expect reduced electricity bills while still enjoying a comfortable environment. This is particularly beneficial in regions with extreme temperatures, where consistent heating and cooling are essential.

The MCF-18TN/24TN also incorporates advanced filtration systems, ensuring that indoor air quality is not compromised. With a multi-layered filtration system, these units effectively capture and eliminate airborne particles, allergens, and pollutants. This feature is especially important for those with respiratory issues or allergies, as it promotes a cleaner and healthier indoor environment.

Moreover, the user-friendly controls of the MCF-18TN/24TN series enhance the overall experience. The intuitive remote control and display panel allow users to easily adjust settings, set timers, and switch between cooling and heating modes with minimal effort. Smart features, such as programmable schedules and energy-saving modes, add an extra layer of convenience.

In terms of design, the MCF-18TN/24TN units are compact and aesthetically pleasing, making them a suitable addition to any modern space. Their sleek appearance complements a variety of interior styles while occupying minimal wall or floor space.

Overall, the Mitsubishi Electronics MCF-18TN/24TN series stands out for its combination of energy efficiency, advanced technology, and user-friendly operation. With its inverter technology, high energy ratings, superior air filtration, and smart features, these air conditioning units provide an effective and reliable solution for achieving consistent comfort in diverse environments.

Mitsubishi Electronics MCF-18TN/24TN manual AIR Flow Velocity and Direction Adjustment

Models: MCF-18TN/24TN