U-1Turning on all the connected devices

Turning on external devices

1. Turn on the connected devices such as the computer and VCR.

Before turning on the monitor, turn on the computer.

Turning on the monitor

2. Turn on the Main Power Switch.

The power indicator turns on green.

The control buttons on the rear of the monitor and the wireless remote control don’t work while the Main Power Switch is off (the power indicator is off).

When using them, check that the Main Power Switch is on (the power indicator is on).

Power Indicator

 

Status

 

 

LED

Power ON

Green

Power OFF

Red

Power Standby when

Red On

“SCHEDULE” is enable

Green Blinking

Power Standby

Red, Green

Diagnosis (Detecting failure)

Red Blinking

 

 

* See troubleshooting on page 55.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

3.When the power indicator glows red, press the POWER button on the

monitor.

The power indicator turns green.

Power Management Function

This function reduces the power consumption of the monitor when the keyboard or the mouse is not used for a fixed period even though the power of the monitor is on.

While this function is working, the screen becomes dark and the power indicator glows green and red.

This function is available only when a computer equipped with the VESA-approved DPM Power Management function is connected to the monitor.

Check that the power management function (power saver) for RGB is ON.

When you turn on this function for VIDEO, the monitor goes into the sleep mode in 10 minutes after DVD/HD, VIDEO<S>, or VIDEO sync signal is lost.

[Description]

DPM: Acronym for Display Power Management

NOTE:

The default power management settings (power savers) for RGB and VIDEO are ON.

Power button Main Power Switch

or

Power button

Wireless remote

control

Downloaded From TV-Manual.com Manuals

English-29

 

Page 33
Image 33
Mitsubishi Electronics MDT65IS 1Turning on all the connected devices, Turning on external devices, Turning on the monitor