To select the COOL, DRY or HEAT mode:
1 Press the | ON/OFF |
button. |
2 Select the operation mode by pressing the MODE button.
Each time this button is pressed, the operation mode is changed in sequence:
(AUTO) → 
(COOL) → 
(DRY) → 
(HEAT)
To stop operation:
■ Press the | ON/OFF |
button. |
After the operation mode is set once, the operation starts in the same mode as
ON/OFF
the one set previously from the next time by simply pressing the 
button.
■When the set temperature is to be changed:
TOO
WARM
•Press the 
button to lower the temperature. One press lowers the temperature by about 1°F.
TOO
COOL
•Press the 
button to raise the temperature. One press raises the temperature by about 1°F.
In COOL operation
•When the outside temperature is low, the fan of the outdoor unit turns on and off frequently or decreases the rotation speed to maintain sufficient cooling capacity.
In DRY operation
•The temperature control (temperature setting) cannot be done.
•The room temperature is slightly lowered in this operation mode.
■The details of the display on the indoor unit are explained on page 6.
If the air conditioner doesn’t cool or heat effectively…
If the fan speed is set to Low or AUTO, sometimes the air conditioner may not cool or heat the air effectively. In this case, change the fan speed to Med. or upper.
Change the fan speed.
Fan speed: Low or AUTO
Fan speed: Med. or upper