Mitsubishi Electronics MSZ-A09NA, MSZ-A12NA, MSZ-A15NA, MSZ-A17NA Movement of the horizontal vane

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT

Movement of the horizontal vane

AUTO

MANUAL

SWING

COOL/DRY					HEAT
			At the start
			of heating
			operation
					When air
			Horizontal	Very small	becomes
			position		warm…
Horizontal position				air flow
						Position (4)
• The vane automatically moves to horizontal position.			• Immediately after the air conditioner starts operat-
It will not swing.			ing, the vane stays at horizontal position. Once the
NOTE:			air from the indoor unit becomes sufficiently warm,
			the vane moves to position (4).
Air blows out upper than position (1).
			• Once the air conditioner starts operating, the fan
• To constantly change the air flow direction, select
			speed increases gradually as the air from the indoor
(SWING) with the	VANE	button.
			unit gets warmer, and continues until the set speed
			is finally reached.
			At the start
			of heating
After			operation
around 0.5					When air
to 1 hour		Position (1)
			Horizontal		becomes
				Very small
			position		warm…	Set position
				air flow
When the air flow direction is
set to position (2), (3) or (4)
• After around one hour of operation, the air condi-			• Immediately after the air conditioner starts operat-
tioner automatically moves the vane to position (1).			ing, the vane stays at horizontal position. Once the
To change the air flow direction to the original set-			air from the indoor unit becomes sufficiently warm,
ting, operate the VANE button on the remote con-			the vane moves to the position corresponding to the
troller again.			set direction of air flow.
• The vane does not move to the straight-down posi-			• Once the air conditioner starts operating, the fan
tion in the COOL and DRY mode.			speed increases gradually as the air from the indoor
			unit gets warmer, and continues until the set speed
			is finally reached.
• The vane moves intermittently between positions (1)			• The vane moves intermittently between positions (2)
and (4). The vane stops for a brief period at posi-			and (4). The vane stops for a brief period at positions
tions (1) and (4).			(2) and (4).
	(1)				(2)

(4)

NOTE:

(4)

•Adjust the vertical AIR FLOW direction using the remote controller. Moving the horizontal vane manually can cause trouble.

•When the operation mode changes in “ (AUTO)” mode, the horizontal vane is automatically changed to the posi- tion in each mode.

8