Front panel
1Hold both ends of the front panel and lift the panel up until a “click” is heard. (1) Holding the hinges, lift the panel up until it is level, and pull the hinges forward to remove the front panel. (2)
1
2 
Hinge
Hole
CAUTION:
•Do not drop the front panel or pull it out forcibly. The panel may be damaged.
•Do not step onto an unstable bench when removing or installing the front panel.
This may cause an injury, etc. if you fall down.
2Wipe the front panel with a soft dry cloth or wash it with water.
After washing the panel, wipe up the remain- ing water with a soft dry cloth and let it dry out of direct sunlight.
•If the dirt is noticeable, wipe the front panel with a cloth soaked in a solution of mild detergent diluted in lukewarm water.
•Do not use gasoline, benzine, thinner, polishing pow- der, or insecticide and do not wash the front panel with a scrubbing brush or the hard surface of a sponge.
•Do not soak the front panel in water/lukewarm water longer than two hours and do not expose the panel to direct sunlight, heat, or flames when drying it. The panel may be deformed or discolored.
3Hold both ends of the front panel, keep the panel level, and insert the hinges into the holes on the upper part of the indoor unit until they click into place. Then, close the front panel securely and press the three positions on the front panel as indicated by the arrows.