Mitsubishi Electronics MSZ-GA35VA, MSZ-GA25VA, MSZ-GA22VA manual Movement of the horizontal vane

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT

Movement of the horizontal vane

	COOL/DRY					HEAT
				At the start
				of heating
				operation
						When air
				Horizontal	Very small	becomes
				position		warm…
	Horizontal position				air flow
							Position (4)
AUTO	• The vane automatically moves to horizontal position.			• Immediately after the air conditioner starts operat-
	It will not swing.			ing, the vane stays at horizontal position. Once the
	NOTE:			air from the indoor unit becomes sufficiently warm,
				the vane moves to position (4).
	Air blows out upper than position (1).
				• Once the air conditioner starts operating, the fan
	• To constantly change the air flow direction, select
				speed increases gradually as the air from the indoor
	(SWING) with the	VANE	button.
				unit gets warmer, and continues until the set speed
				is finally reached.
				At the start
				of heating
	After			operation
	around 0.5					When air
	to 1 hour		Position (1)
				Horizontal		becomes
					Very small
				position		warm…	Set position
					air flow
	When the air flow direction is
MANUAL				ing, the vane stays at horizontal position. Once the
	tioner automatically moves the vane to position (1).
	set to position (2), (3) or (4)
	• After around one hour of operation, the air condi-			• Immediately after the air conditioner starts operat-
	To change the air flow direction to the original set-			air from the indoor unit becomes sufficiently warm,
	ting, operate the VANE button on the remote con-			the vane moves to the position corresponding to the
	troller again.			set direction of air flow.
	• The vane does not move to the straight-down posi-			• Once the air conditioner starts operating, the fan
	tion in the COOL and DRY mode.			speed increases gradually as the air from the indoor
				unit gets warmer, and continues until the set speed
				is finally reached.
	• The vane moves intermittently between positions (1)			• The vane moves intermittently between positions (2)
	and (4). The vane stops for a brief period at posi-			and (4). The vane stops for a brief period at positions
	tions (1) and (4).			(2) and (4).
SWING		(1)				(2)
		(4)				(4)

NOTE:

• Adjust the vertical AIR FLOW direction using the remote controller. Moving the horizontal vane manually can cause trouble.

• When the operation mode changes in “ (AUTO)” mode, the horizontal vane is automatically changed to the posi- tion in each mode.

■To change the horizontal direction of the air flow, move the vertical vane manually.

Adjust the vane before operation starts.

Since the horizontal vane moves automatically, your fingers may be caught.

To change the air flow direction not to blow directly onto your body.

To change the air	When to use this function?	COOL/DRY		HEAT
flow direction
Pressing and hold-	Use this function if you don’t	The air conditioner starts the	The air conditioner starts heat-
ing the VANE button	want the air from the indoor	cooling or drying operation	ing operation approx. 3 min-
for 2 seconds or	unit to blow directly onto your	approx. 3 minutes after the	utes after the vane has moved
	body.	vane has moved to the hori-	to the horizontal position.
more causes the
	• Depending on the shape	zontal position.	•	Sometimes	the	area
horizontal vane to
	of the room, the air may	• When the VANE button is		around your feet may not
reverse and move	blow directly onto your	pressed again, the vane		warm. To warn the area
to horizontal posi-
	body.	returns to the previously-		around the feet, set the
tion.
	• Press the VANE button	set position and the air		horizontal	vane	to
	again to return the vane to	conditioner starts the cool-		(AUTO) or the downward-
Horizontal	the previously-set position.	ing or drying operation in		blowing position.
		approx. 3 minutes.	•	VANE
position				When the	button is
				pressed again, the vane re-
				turns to the previously-set
				position and the air condi-
				tioner starts heating opera-
				tion in approx. 3 minutes.

8