11
7PRINTING
Print a picture with an application
software. The image data is transferred
through USB interface.
cutter
You can set the number of copies by pressing
the COPY button on the front panel. (Setting
range : 1 to 200)
You can copy the same picture as many times
as you desire until a new image data is printed.
The set number of copy printing and the
number of the remainings are displayed on the
indicator as shown right.
The number of copy print setting is not memo-
rized.
When pressing the UP button during copy
printing, continuous printing is available.
Turn on the power. Cut the printed paper.
Print a picture displayed on the screen.

Copy Printing

•Press the
POWER
switch to turn
on the power.
• Cut the printed
paper with the
cutter by
tearing off the
paper in the
upper right
direction.
• Do not pull the paper in the horizontal
direction. The paper inside the unit may
be displaced and printing may not be
carried out correctly.

Cancel of Copy Printing

When pressing the FEED button during copy
printing, the copy printing is cancelled upon
completion of the current copy.
Indicator
Number of copy printing /
remainings
1 - 99
100 - 199
200
Continuous printing