Mitsubishi Electronics P93DE, P93DW

Cause/Error display

No paper [Symptom]

•When the paper runs out or the paper is not installed, printing

becomes impossible and an alarm tone is heard.

In this case, all the buttons become invalid.

•If this error occurs while more than one copy is being printed or

there are images waiting to be processed, printing is cancelled

at the occurrence of the error.

Symptom/Remedy

[Remedy]

Install a new roll of paper according to "5. INSTALLATION OF

PAPER" on page 8.

When the paper is correctly installed while the printing of more than

one copy has been suspended or there are images waiting to be

processed, an alarm tone is heard. Then, the paper is fed automati-

cally about 15 cm and printing resumes.

After the error is resolved, the unit resumes printing from the inter-

rupted image and finishes printing all the outstanding images.

Button input

error [Symptom]

•The button becomes invalid and an alarm tone is heard in the

following cases.

• During adjusting the printer brightness or the printer contrast,

the UP button is pressed exceeding the upper limit value (LED

display : ) or the DOWN button is pressed exceeding the

lower limit value (LED display : )

• The UP or DOWN button is pressed when the button func-

tions are locked with the LOCK button or the DIP switch No. 1.

The indicator displays “ ” for one second and return to the status

before the error occurred.