5

Wired remote controller (Option)

°F°C
°F°C
ERROR CODE
AFTER
TIMER
TIME SUN MON TUE WED THU FRI SAT
ON
OFF
Hr
AFTER
FILTER
FUNCTION
ONLY1Hr.
WEEKLY
SIMPLE
AUTO OFF
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY
MONITOR/SET
CLOCK
ON/OFF
••

Display Section

For purposes ofthis explanation,
allparts of the display are shown.
During actualoperation, only
the relevant items will be lit.
Identifies the currentoperation
Shows the operating mode, etc.
*Multilanguage display is available.
“CentrallyControlled”indicator
Indicates that operation from the
remote controller has beenprohib-
itedby a master controller.
“Timer is Off” indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Day-of-Week
Shows thecurrent day of the week.
Time/Timer Display
Shows the current time, unless the simpleor Auto Off
timer is set.
If the simple or Auto Offtimer is set, the time to be
switched off isshown.
“Sensor” indication
Displays when the remote controller
sensor is used.
“Locked” indicator
Indicatesthat remote controller but-
tons have been locked.
“CleanThe Filter” indicator
To be displayed on when it istimeto
clean the filter.
Timer indicators
Theindicator comes on if the corre-
sponding timer is set.
Up/DownAir Direction indica-tor
The indicator shows the direc-
tion of the outcoming airflow.
“One Hour Only” indicatorRoomTemperature display
Shows the room temperature.The room
temperature display range is 46–102˚F.
The displayblinks if the temperature
is less than46˚F or 102˚F or more.
Louver display
Indicates the action ofthe swing louver.
Does not appear if the louver is not
running.
(Power On indicator)
Indicates that the power is on.
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.

Operation Section

Temperature setting buttons
Down
Up
Timer Menubutton
(Monitor/Set button)
Modebutton (Return button)
SetTime buttons
Back
Ahead
TimerOn/Off button
(Set Daybutton)
Opening the
cover
ON/OFFbutton
Fan Speed button
Filter button
(<Enter> button)
Test Run button
Checkbutton (Clear button)
Airflow Up/Downbutton
Louverbutton
( Operationbutton)
To return operation
number
Ventilationbutton
( Operationbutton)
To go to next operation
number
Note:
“PLEASEWAIT” messageThis message is displayed for approximately 3minutes when power is supplied to the indoor unit or when the unit is recoveringfrom a power failure.“NOTAVAILABLE” messageThis message is displayedif an invalid button is pressed (to operate a function that the indoor unit does not have).If a single remotecontroller is used to operate multiple indoor units simultaneously that are different types, this message will not be displayed asfar as any of the indoor units is equipped with the function.
Built-in temperature sensor
Displays if the airflow is set to
low or downward during COOL
or DRY mode. (Operationvaries
according to model.)
The indicator goes off in 1 hour,
when the airflow direction
also changes.