Mitsubishi Electronics UD8850U, UD8900U manual SIGNAL menu, 5.6.7, NETWORK menu

5.6.6 SIGNAL menu

ITEM			Function		Data
	Character		ASCII code
MEMORY CALL	MMC	4Dh 4Dh 43h			0 (AUTO), 1 to 8 (MEMORY 1 to 8)
HORIZ.POSITION	HP	48h	50h		+ (increment), - (decrement)*1
VERT. POSITION	VP	56h	50h		+ (increment), - (decrement)*1
FINE SYNC.	FN	46h	4Eh		00–31
TRACKING	TRK	54h	52h	4Bh	+ (increment), - (decrement)*1
COMPUTER INPUT	CIN	43h	49h	4Eh	0 (RGB), 1 (YCBCR/YPBPR), 2 (AUTO)
OVER SCAN	VOS	56h	4Fh 53h		00 (90%) – 10 (100%)
HOLD	HLD	48h	4Ch 44h		0 (OFF), 1 (ON)
HOLD BEGIN	HLB	48h	4Ch 42h		00–99
HOLD END	HLE	48h	4Ch 45h		00–99
ASPECT	SC	53h	43h		0 (NORMAL, 1 (16:9), 2 (NATIVE), 3 (FULL),
					4 (USER)
ASPECT-USER-	ZMH	5Ah 4Dh 48h			050 to 500
ZOOM(H)					NAK is returned when the ASPECT setting is other
					than USER.
ASPECT-USER-ZOOM(V)	ZMV	5Ah 4Dh 56h			050 to 500
					NAK is returned when the ASPECT setting is other
					than USER.
ASPECT-USER-HORIZ.	AHP*	41h	48h	50h	*:+, -
POSITION					+:incriment -:decriment
					NAK is returned when the ASPECT setting is other
					than USER.
ASPECT-USER-VERT.	AVP*	41h	56h	50h	*:+, -
POSITION					+:incriment -:decriment
					NAK is returned when the ASPECT setting is other
					than USER.
ASPECT-USER-RASTER	RPH*	52h	50h	48h	*:+, -
POSITION(H)					+:incriment -:decriment
					NAK is returned when the ASPECT setting is other
					than USER.
ASPECT-USER-RASTER	RPV*	52h	50h	56h	*:+, -
POSITION(V)					+:incriment -:decriment
					NAK is returned when the ASPECT setting is other
					than USER.
ASPECT-USER-RESET	ASRST	41h	53h	52h 53h 54h	The setting contents of ASPECT USER are reset.
					NAK is returned when the ASPECT setting is other
					than USER.
CLAMP POSITION	CLP	43h	4Ch 50h		001 to 255
CLAMP WIDTH	CLW	43h	4Ch 57h		01 to 63
VERT. SYNC.	VSC	56h	53h	43h	0 (AUTO), 1 (OFF)
LPF	LPF	4Ch 50h 46h			0 (OFF), 1 (ON)
SHUTTER(U)	SHU	53h	48h	55h	000 to 259
SHUTTER(L)	SHL	53h	48h	4Ch	000 to 259
SHUTTER(LS)	SHLS	53h	48h	4Ch 53h	000 to 311
SHUTTER(RS)	SHRS	53h	48h	52h 53h	000 to 311

*1) Setting range differs depending on the input signals.

5.6.7		NETWORK menu
		ITEM		Function		Data
			Character	ASCII code
	PROJECTOR NAME		NAME	4Eh 41h	4Dh 45h	Up to 15 single-byte alphanumeric characters
						Effective only during P-ON.
	NETWORK RESTART		NRCN	4Eh 52h	43h 4Eh	LAN microcomputer is reset and restarted.
	•	Some commands are not executed depending on the input signal. The operational restrictions same as those
		on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.

16