Part III: Setup

Convergence

Advanced Features Menu: Convergence

Convergence

(Figure 1)

Your Mitsubishi TV has three picture tubes

 

which are aligned to properly converge the

 

projected light beams on the screen. Each

 

picture tube projects a single color of red,

 

blue or green. During production, your

 

TV was carefully adjusted to properly align

 

these colors. As a special feature, you have

 

the ability to adjust the red and blue light

 

beams in reference to the fixed green light

 

beam. This process is called convergence.

Figure 1. Advanced Features menu.

Convergence Menu

(Figure 2)

Convergence aligns the entire screen at once. Select either Red Convergence or Blue Convergence to begin alignment. To align 64 individual points, see Advanced Convergence, page 39.

Reset Factory Defaults

(Figure 2)

This allows you to reset the convergence

Figure 2. Convergence menu.

to the factory settings. The message “Con- vergence Reset Completed” will be displayed when the factory defaults have been

Convergence Screen

(Figure 3)

When the Red and Blue crosshairs are properly converged, the center-screen crosshairs will appear white. You can use , , ,

or to move the Red and Blue crosshairs.

 

Press VIDEO to switch between Red and

 

Blue. Press AUDIO for the Advanced Con-

 

vergence screen, and see Advanced Conver-

 

gence, page 39, for instructions.

Figure 3. Convergence screen.

38