WARNING:
Unplug immediately if there is something wrong with your product.
Do not operate if smoke, strange noise or odor comes out of your product. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
Never remove the cabinet.
This product contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the Owner’s Guide, do not attempt to service this product yourself. Please contact your dealer when you want to fix, adjust or inspect the product.
Do not modify this equipment.
It can lead to fire or electric shock.
Use the optional specified power supply cord.
This apparatus must be grounded.
Place the product more than 5 cm (2 in.) from the wall (except at the rear) to prevent blocking the intake, exhaust slots and ventilation of this product because hot air comes out of it.
Carry the product by all four handles, not by two handles.
Do not use the product under the following circumstances, which may cause fire or electric shock.
•in a dusty or humid place
•near a heater
•in a oily, smoky or damp place
•in direct sunlight
•with high temperature, such as the closed car
•where the temperature is lower than 10˚C (50˚F) or higher than 35˚C (95˚F)
•for
CAUTION:
Battery replacement of the optional remote control R-XL50TX
•Improper use may result in fire, injury, or spread dirt due to leakage, heat generation, or explosion.
•Replace all the batteries with new ones. Use two AA batteries (R6P).
•Load the batteries with their (+) and
•Load the batteries from
NOTE:
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV.
Your MITSUBISHI ELECTRIC product is de- signed and manufactured with high quality mate- rials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their
Please, dispose of this equipment at your local community waste collection/recycling centre.
In the European Union there are separate collec- tion systems for used electrical and electronic product.
Please, help us to conserve the environment we live in!
COMPLIANCE NOTICE OF FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in- struction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the
Changes or modifications not expressly approved by Mitsubishi could void the user's authority to operate this equipment.
COMPLIANCE NOTICE OF INDUSTRY CANADA
This Class A digital apparatus complies with Canadian
COMPLIANCE NOTICE OF EC DIRECTIVE
This data display complies with requirements of 89/336/EEC, 2006/95/EC and 93/68/EEC. The require- ments of susceptibility have chosen at a level, that makes interference free operation possible in living areas, office areas and light industry, related to indoor and outdoor operation. All places of operation are related to the public low voltage power supply.
This is a equipment of Class A. This device could cause interferences in residential areas; in the case of interferences it can be demand from the user to provide appropriate solutions and pay for it.
Warning:
This is class A information technology equipment. When used in a household environment, this product may cause radio interface. In such a case, the user may be required to take suitable countermeasures.
