Mitsubishi Electronics WD-57833 manual Operation of Split Screen, Split Screen Displays

4. TV Operation and Features 35

Split Screen

Split Screen allows you to view pictures from two different sources at the same time. Split Screen is available when you have video sources connected to the TV in addition to connections on ANT 1 or ANT 2.

Operation of Split Screen

Split Screen Operations	Instructions
Turn Split Screen on or off	Press SPLIT.
Switch the sound source between the	Press or		. The speaker icon (right) appears briefly to indi-
main picture (left) and sub-picture (right).	cate the sound source. The sound source is the side you can
	control with the remote control.
Check which picture is the sound source.	Press INFO. The speaker icon appears and indicates the sound source.
Change the source of the sub-picture.	1.	Press	to make the sub-picture the sound source.
	2.	Press INPUT to display the Split Screen Input Selection menu.
	3.	Move the highlight to the icon for the input you wish to view as the
		sub-picture.
	4.	Press ENTER to make the change.

Grayed-out input icons are unavailable as Split Screen sources or with the current main-picture source.

Change sub-picture channel (when	1.	Press	to make the sub-picture the sound source.
the input source is ANT 1, ANT 2, or a	2.	Press	CH/PAGE  / .
NetCommand-controlled cable box or
satellite receiver).
Freeze or unfreeze the sub-picture.	Press		(Pause). Press	again to return to normal moving video.

Change the size of the main and sub-pic- Repeatedly press FORMAT to cycle through picture sizes. See the follow-

tures.	ing page for sample displays.
Make the sub picture fill the screen.	1.	Press to make the sub-picture the sound source.
	2.	Press SPLIT to close Split Screen mode.

Split Screen Displays

16:9 Main Picture

4:3 Sub-	16:9 Sub-
Picture	Picture

FORMATFORMAT

‡ ‡

FORMATFORMAT

4:3 Main Picture

4:3 Sub-	16:9 Sub-
Picture	Picture

FORMAT FORMAT

FORMAT FORMAT

TV Inputs for Split Screen

The available Split Screen picture sources are listed below. Check marks indicate combinations of picture sources you can view in Split Screen mode.

Picture	Sub-Picture	ANT1	ANT2	INPUT	COMPONENT	HDMI	HDMI(1080p)	IEEE1394
Main
ANT 1
ANT 2
INPUT

COMPONENT

HDMI

IEEE 1394

Press the FORMAT key repeatedly while in Split Screen mode to change the display.

‡HDMI 1080p can appear only as main picture in the marked Split Screen combinations.

Only when main picture and sub-picture are from different INPUT jacks.

Only when main picture and sub-picture are from different COMPONENT jacks.