Mitsubishi Electronics WD-57833 manual Appendix E Troubleshooting, TV Reset Comparison Guide

Appendices 81

Appendix E: Troubleshooting

TV Reset Comparison Guide				channel (a channel from ANT 1, ANT 2, a cable box, or
You can resolve many common TV problems using				satellite receiver), first check other channels from the
				same input before changing settings. If most other
the reset functions described in the following table.
				channels from the same input seem correct, there is
See also the troubleshooting suggestions later in this
				likely a problem with the broadcast rather than with the
appendix.
				TV. Use care in this case, as changes you make to fix
IMPORTANT
				problems on individual channels also affect all other
Before you change sound or picture settings: If				channels on the same input.
picture or sound settings seem wrong for a broadcast
Reset Name	When to Use	How to Use			Resulting Action
Format	When the picture shape	Press the FORMAT key to cycle through the			The last-used format for a signal
	seems incorrect, use	available formats to find the best format			type is memorized for each input.
	FORMAT to change the	for the current picture.			The next time the same input and
	shape of the picture.				the same signal type is viewed, the
					last-used format will be recalled.
PerfectColor™	When the color intensities	1.	While viewing the input to be reset,		All PerfectColor/PerfecTint sliders
and PerfecTint™	seem out of balance,		press MENU to display the Main		are reset to the original center
Reset	use the PerfectColor/		menu with the A/V icon highlighted.		position. The PefectColor/PerfecTint
(for the single	PerfecTint reset to reset	2.	Use	to highlight PerfectColor	settings for other inputs remain
input currently	the color balances to the				unchanged.
			and press ENTER to display the
being watched)	original factory settings.
			PerfectColor adjustment screen.
	Both PerfectColor and
		3.	Press CANCEL to reset the colors.
	PerfecTint and are reset
	at the same time.
A/V Memory	When audio and/or video	1.	While viewing the input to be reset,		All Audio and Video settings for the
Reset	settings for a single input		press MENU to display the Main		individual input are reset except
(for the single	seem incorrect, use A/V		menu with the A/V icon highlighted.		for the Listen To, Language, audio
input currently	Memory Reset to return	2.	Use	to highlight the Reset icon	Balance, and Closed Caption
being watched)	the input to the original				settings.
			and press ENTER to reset.
	factory settings.
A/V Reset	To reset audio and video	While viewing the TV, press the front			All Audio and Video settings are
(for all inputs)	adjustments for all inputs	panel buttons GUIDE and FORMAT at the			returned to the original factory
	to the original factory	same time.			settings, including Listen To and
	settings.				Language, plus Closed Captions
					settings and Format settings .
Channel	To erase and re-	1.	While viewing the TV, press MENU to		All previously memorized chan-
Memorization	memorize channels on		display the Main menu.		nels for the selected antenna
	Ant 1 or Ant 2.	2.	Press	to highlight the Setup icon.	input are erased and a new
		3.	Press	to highlight the Scan icon.	set of memorized channels is
		4.	Press	to highlight the antenna	created. All custom settings for
			input and reception mode, e.g. Ant		Fav, channel names, and channel
			1 Air.	to highlight the Start	locks are deleted. To add or
		5.	Press		delete individual channels, see
			button icon and press ENTER to start		Edit menu instructions in chapter
			the memorization.
					5, “TV Menu Settings.”
Lock Menu Pass	To change your Lock	See the cutout page in Appendix C.			Allows a new code to be
Code	menu pass code				established.