Mitsubishi Electronics WD-73CA1, WD-73C1 Appendix A: Auto Input Sensing, About Auto Input Sensing

24Appendices

Appendix A: Auto Input Sensing

About Auto Input Sensing

This TV'sEasy Connect TM Auto Input Sensing feature detects the following connections automatically:

•Analog video jacks

•HDMI inputs (when powered on)

Auto Input Sensing for Most Devices

When you first connect a device, the TV will:

a.Detect the connected device and automatically switch to it.

b.Prompt you to identify the device type.

c.Repeat these steps for other newly detected devices.

When You First Connect a Device

•Most Device Types. Select the device type from the on-screen list. The device type you select here will appear as an icon in the Input Selection menu.

•A/V Receiver. For an HDMI-equipped A/V receiver, select AVR from the list of device types if the A/V receiver is not recognized automatically.

HDMI CEC Devices Compatible with the TV's HDMI Control Feature. Compatible CEC-enabled HDMI devices are often recognized automatically by the TV. HDMI Control may allow you to control some functions of a CEC-enabled device. See the supple- mental Owner'sGuide at www.mitsubishi-tv.com.

New Device Found screen for a device with HDMI control enabled. Select On if you want to enable the TV's HDMI control of the device. In some cases, as

in the example, you will also be prompted to select a device name.

Tips on Auto Sensing

•Choose a different name for each input.

•The antenna input (ANT) is never detected. You can turn off the unused antenna input in the Inputs > Name menu.

•Change the device type displayed in the Input Selection menu by using the Inputs > Name menu.

•Some HDMI devices can automatically tell the TV what name to use in the Input Selection menu and you will be unable to change the name.

Reactivating Auto Input Sensing for an HDMI Input

After you disconnect an HDMI device, Auto Input Sensing is temporarily disabled and the disconnected device still appears in the Input Selection menu.

Perform these steps:

1, Power off the device. Disconnect the HDMI cable.

3, Press MENUon the TV remote control to enter the TV main menu.

4, Go to Inputs > Name.

5, Highlight the HDMI input name and press ENTERto select Delete.

6, Press EXITto clear the menus.

Inputs > Name menu with Delete selected for HDMI-3.

ZConnect the new device and the New Device Found screen will display.

For assistance call 1(800) 332-2119